1-888-525-6696
Search
Search

Anchor Audio UHF-EXT500-B External Wireless Package with Wireless Belt Pack and Lapel Microphone

External Wireless Package with Wireless Belt Pack (WB-EXT500) and Lapel Microphone (LM-60)

$560.00

GTIN: 819941016373 SKU UHF-EXT500-B Categories ,

Description

The Anchor Audio UHF-EXT500-B is an external wireless beltpack system that includes the WR-EXT500 wireless receiver, the WB-EXT500 wireless beltpack transmitter, and the LM60 lapel microphone with a mini-XLR (TA4F) connector. The PLL synthesized system operates between 540 and 570 MHz and features 700 selectable channels with automatic frequency settings for finding the best, interference-free settings.

Anchor Audio WR-EXT500 External Wireless Receiver
The Anchor Audio WR-EXT500 External Wireless Receiver is a professional-quality UHF wireless microphone receiver that operates in the 540 to 570 MHz bandwidth. The receiver is compatible with the WH-EXT500 wireless handheld microphone transmitter and the WB-EXT500 wireless beltpack transmitter.

The front panel of the WR-EXT500 features an LCD display, channel up/down buttons, a sync button, and a set button, plus a volume controller dial to adjust the receiver output. The rear panel includes two BNC antennae connectors, a balanced XLR output, an unbalanced 1/4″ output, and a mic/line switch. A squelch knob is available to adjust or decrease the noise floor level. The WR-EXT500 ships with two antennas and a 12 VDC power adapter.

700 selectable channels
Set interference-free channels by using automatic frequency setting
PLL Synthesized wireless microphone system
540 to 570 MHz wireless frequency range
Over 100 dB of dynamic range
Manual, preset, and automatic frequency scan function
Anchor Audio WB-EXT500 Wireless Beltpack Transmitter with TA4F Plug
The Anchor Audio WB-EXT500 Wireless Beltpack Transmitter is a professional-quality UHF wireless transmitter that operates in the 540 to 570 MHz bandwidth. The beltpack is compatible with the WR-EXT500 wireless receiver and features a TA4F connector (mini-XLR) that’s compatible with a variety of microphones, including headband, collar, and lapel microphones.

The beltpack transmitter features a power On/Off button, a Mute button, LED indicators, an LCD display for channel number and battery power level, and a battery compartment, which holds two AA batteries. A gain switch sets the audio input and offers -20, -10, and 0 dB settings.

Built-in talk/mute button
Mini-XLR (TA4F) connector is compatible with lapel and headset microphones
Gain switch adjusts audio input (-20, -10, 0 dB)
700 selectable channels
Set interference-free channels by using automatic frequency setting
540 to 570 MHz wireless frequency range
Over 100 dB of dynamic range
Manual, preset, and automatic frequency scan function

UPC: 819941016403
Anchor Audio LM-60 – Cardioid Lapel Mic with Mini XLR Connector
The LM-60 Cardioid, Electret Lavalier Microphone, with a 4-pin mini XLR female connector, is made for use with the Anchor-Audio WB6000 beltpack transmitter.

Anchor Audio WR-EXT500 External Wireless Receiver Specs
Display LCD
Front Panel Controls Up/Down Button: Channel Forward / Backward
Sync Button: Actuate the Synchronization with Transmitter
Set Button: Actives Manual, Auto-Scan, or Preset Mode
Volume Dial: Adjusts Receiver Output Level
Rear Panel Antennae: 2 x BNC
Balanced Output: XLR
Unbalanced Output: 1/4″ / 6.35 mm
Mic/Line Switch: Adjusts Audio Level for Mic (-20 dB) or Line (0 dB)
Squelch Knob: Adjust or Decrease Noise Floor Level
Power Adapter: 12 VDC (Center-Pin Positive)
Frequency Range UHF 540 to 570 MHz (Regionally Selected)
Oscillator PLL Synthesized
Modulation FM
Signal-to-Noise Ratio (SNR) >100 dB, at 200 kHz Deviation and 60 dBµV Antenna Input
Image & Spurious Rejection 70 dB Minimum
Receiving Sensitivity At 2 µV over 52 dB S/N Ratio
AF Response 80 Hz to 18 kHz
THD 100 dB
Tone Signal 32.768 kHz
Audio Output Balanced & Unbalanced
Enclosure Half 19″ EIA Rack Metal Case
Power Supply 12 VDC, 500 mA
Current Consumption 260 W ±10 mA
Dimensions (H x W x D) 1.7 x 7.9 x 7.2″ / 4.2 x 20.1 x 18.3 cm
Weight 2.1 lb / 930 g
Anchor Audio WB-EXT500 Wireless Beltpack Transmitter With TA4F Plug Specs
Microphone Connector Mini-XLR TA4F Connector
Display LCD Display for Channel Number and Battery Power Level
Controls Power Button
Power LED: Indicates Power/Battery Level
Mute Button: Toggles Between Mute and Unmute
SYNC Button: Actuates the Synchronization Process with Receiver
Indicators Green: Ready
Flashing Green: The Synchronization Process is Actuated
Flashing Red: Low-Battery Power with Less than 10 Minutes of Operation Left
Blue: Mute Status
Frequency Range UHF 540 to 570 MHz (Regionally Selected)
Channel Selection SYNC with Receiver
RF Power Output 10 mW Max
Frequency Stability ±0.005%
Spurious Emission >60 dB Below Carrier Frequency
Gain 0, -10, -20 dB Settings
Battery 2.4 V (2 x 1.2 V AA Size Rechargeable Batteries)
3 V (2 x 1.5 V AA Size Batteries)
Battery Access Battery Compartment: 2 x AA Dry or Rechargeable Batteries
Current Consumption 120 mW ±10 mA
Dimensions (H x W x D) 3.8 x 2.5 x 1″ / 9.7 x 6.4 x 2.4 cm
Weight 0.2 lb / 860 g
Anchor Audio LM-60 – Cardioid Lapel Mic With Mini XLR Connector Specs
Packaging Info
Package Weight 0.15 lb
Box Dimensions (LxWxH) 3.95 x 3.15 x 1.25″

Additional information

Weight 2.1 lbs
Dimensions 1.7 × 7.9 × 7.2 in
See any errors on this page? Let us know