Ashly ne4800d4x8 Network Protea DSP Processor with AES3 Input Option

Connecting and controlling an audio processor for networked systems has now been simplified with Ashly’s NE-Series ne4400, ne4800 and ne8800 digital signal processors. These Network Enabled (NE) processors offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

Standard units are analog line input/output format of 4×4 (4400), 4×8 (4800), and 8×8 (8800) with four option bays supporting network audio, AES/EBU, and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit/96kHz processors with sample rates of either 48 KHz or 96 KHz. Processing blocks include an 8×8 matrix mixer, a full array of variable Q graphic and parametric equalization, crossover filters to 8th-order Butterworth, Bessel, Linkwitz, and Notched-Linkwitz, an extremely advanced automatic feedback suppressor, autolevelers, compressors, matrix duckers, limiters, frequency-keyed noise gates, time delay up to 1365 ms on every channel, sinewave, pink noise, and white noise generators.

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Ashly’s Protea NE Software on a PC platform. Hot-plug software control allows you to plug any function into any channel block even when running live audio with no latency or recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. No front panel controls and multi-level software security with password access assures you a tamperproof audio system.

Additional features include: network audio routing at matrix mixer to inputs from outputs, or in/out of matrix mixer, 8 link groups on most functions, automatic master clock switchover between network, word clock, AES/EBU, and internal clock, a high-performance analog audio path – dynamic range exceeding 114 dB, support of Ashly digital remote controls, programmable 8 channel 5V logic input or output control, 8 channels of 0 to 5V analog level control, word clock input and output and a front panel full meter bridge with mute keys.

Available hardware options are: 4-channel mic/line input option with software controllable gain and phantom power, CobraNet network audio input and output, EtherSound network audio input and output, AES/EBU digital audio input and AES/EBU digital audio output.

Ashly ne4800D Features:
Three models – 4×4, 4×8, and 8×8 format
Optional mic inputs, Cobranet, Ethersound, and AES/EBU
10/100 Ethernet and RS-232 computer interface is standard
Extensive DSP Available
Easy and intuitive user interface
24-bit audio resolution
32-bit SHARC DSPs
Sample rates of 48 KHz and 96 KHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz, and Notched-Linkwitz filters
Advanced automatic feedback suppression
Word clock input and output
Euroblock connectors for audio, preset recall, DC remote level, and data I/O
Six dedicated remotes for Level, Logic I/O, and Programmable Functions
Third party control friendly
Input and output metering
Multi-level Security
Five year worry-free warranty

Ashly ne4800D Specifications:
Overall Performance
Frequency Response, 20 Hz – 20kHz:
Analog In, Digital Out: +/- 0.1 dB
Digital In, Analog Out: +/-0.25 dB
Analog In, Analog Out: +/- 0.25 dB
Digital In, Digital Out: N/A
Dynamic Range, 20Hz-20kHz, unweighted:
Analog In, Digital Out: > 115 dB
Digital In, Analog Out: > 114 dB
Analog In, Analog Out: > 114 dB
Digital In, Digital Out: N/A
THD+N, 1kHz, +20dBu analog (-1dBFS digital):
Analog In, Digital Out: < 0.001 % Digital In, Analog Out: < 0.002 % Analog In, Analog Out: < 0.002 % Digital In, Digital Out: < 0.00001 % Latency at 48 KHz (96 kHz)4: Analog In, Digital Out: 1.42 ms (0.71 ms) Digital In, Analog Out: 0.90 ms (0.45 ms) Analog In, Analog Out: 2.21 ms (1.11 ms) Digital In, Digital Out: 0.10 ms (0.05 ms) Audio Inputs Input Type: Analog: Active balanced Euroblock Digital: Transformer balanced female XLR Input Impedance: Analog: 20 kOhms Digital: 110 Ohms Maxinput level: Analog: +20 dBu Digital: 7.0Vpp Audio Outputs Output Type: Analog: Servo-balanced Euroblock Digital: Transformer balanced male XLR Output Impedance: Analog: 20 Ohms Digital: 5.0 Vpp Digital Audio Hardware Sample Rates: 48 kHz, 96 kHz DSP Processing: 32-bit floating-point Sharc processor array Audio Input Source Selection: Selectable in adjacent channel pairs from analog, digital, or network inputs Network Audio Routing: Selectable between input/output or internal to matrix mixer Digital Audio Output Jitter: 0.5 ns average, 1.0 ns peak Digital Control Ethernet Control: Standard RJ45 10/100 Ethernet with autoconfiguration RS-232 Control: Standard female Dsub9 jack 4-pin active remote: 4-pin Euroblock for phantom-powered bidirectional remotes Logic Inputs: 9-pin Euroblock for (8) assignable 5V logic inputs Logic Outputs: Shared with logic inputs. +12V at 10mA output high, 100mAinput low Analog Control Remote attenuators: 10-pin Euroblock for (8) assignable 0-5 VDC passiveremote attenuators General Power Requirements: 90 – 240 VAC, 50 – 60 Hz, 70 W maximum Shipping weight: 14 lbs. (6.35 kg) Dimensions: 19.0” L x 3.5” H x 8.5” D (48.26 cm x 8.89 cm x 21.59 cm) Environmental: 40-12 DSP Functions Automatic Feedback Suppressor Filters: 12 Detection frequency range: 25 Hz – 20 kHz FilterModes: Floating Restricted Manual Locked Sensitivity Control: 5 levels Floating Filter Reset: 5 seconds to 24 hours Parametric EQ: 10-, 6-, 4-, and 2-band Graphic EQ: 31-band, constant or proportional Q Crossover Filters Type: Linkwitz-Riley Notched Linkwitz- Riley Bessel Butterworth Low-Pass and High-Pass Filters Type: Linkwitz-Riley Notched Linkwitz- Riley Bessel Butterworth Notch: 1/64 oct. to 4 octaves Frequency Range: 20 Hz – 20 kHz, 1 Hz increments Band-Pass Frequency Range: 20 Hz – 20 kHz, 1 Hz increments Bandwidth: 1/64 oct. to 4 octaves All-Pass: Second-Order (-180 degrees) Vari-Q LPF and HPF: Second-order Frequency Range: 20 Hz – 20 kHz,1 Hz increments Filter Q: Adjustable from 0.267 to 3.047 Shelving Filters Selectable 6 db/oct. or 12 dB/oct. Frequency Range: 20 Hz – 20 kHz in 1 Hz increments Boost/cut range: -15 dB to +15 dB, 0.1 dB increments Additional DSP Blocks Delay: Up to 1.365 seconds Ducker: Duck at input or in mixer Gate: Frequency keyable Signal Generator: Sinewave, white and pink noise Matrix Mixer Compressor Limiter Autoleveler