Ashly Pema Powered 4125.70 Processor (CobraNet)

The Ashly Pema Powered 4125.70 Processor is a powerful and flexible all-in-one solution for routing and amplifying audio in multi-zone installations, houses-of-worship, retail spaces, restaurants, bars and much more. The Pema series offers extensive DSP control, making it virtual integrated PA solution “in a box”. Simply connect the audio input sources and speakers and easily mix and route audio signal, control compression, gate, EQ, ducker parameters and much more.
There are 8 inputs and 8 outputs via Euroblock I/O and 8 built-in mic preamplifiers with phantom power. Both stereo and summed mono outputs are supplied and a dedicated telephone / PBX input is also standard. Pristine audio throughput is ensured with 24-bit A/D~D/A audio resolution and 96kHz or 48kHz sample rates supported. A wide array of control includes automatic feedback suppression, ambient noise control, adjustable HP and LP filters and more.
4-channel amplifier rated at 125 watts per channel
8-in x 8-out sophisticated matrix mixing
8 built-in mic pre’s
Gain sharing automatic microphone mixing (Automixer)
Automatic feedback suppression
Ambient noise compensation
Dedicated telephone/PBX input
Dual RCA and balanced euroblock inputs
Post DSP AUX line level outputs
Stereo summed to mono
Event scheduling (RTC)
Adjustable HP/LP filters
Built-in pink/white noise & sine wave generator
Extensive signal processing: Full suite of Ashly NE Series DSP
Hot-plug DSP placement, 96kHz or 48kHz sample rate
32-Bit SHARC DSP, 24-bit A/D~D/A audio resolution
15V Phantom power
Full control using Ashly software over 10/100 baseT Ethernet
Easy and intuitive user interface
Automatic DHCP network IP configuration
Euroblock connectors for preset recall, DC remote level control and data in/out
External control via Ashly standard wall remotes or Ashly Ethernet wall remotes
Level control via variable DC control voltage
Stand-By mode activation via contact closure
Multi-level security

Ashly 4125 Specs
Number of Channels 4
Power Rating 70 V / 100 V:
125 W per Channel (Full Range, 1% THD)
Performance
Frequency Response 20 Hz to 20 kHz ±1 dB
Damping Factor > 250 at 8 Ohms
Input Sensitivity 7.2 dBu
Input Impedance 2RCA:
3.16 Kilohms (Summed-Mono)
Mic/Line:
4.8 Kilohms
Telephone/PBX:
3.9 Kilohms
Max Gain 32 dB
SNR > 102 dB
THD 8 Ohms:
< 0.5% (Full Range, at Rated Power -10 dB) Intermodulation Distortion < 0.5% (SMPTE) Crosstalk -80 dB (Below Rated Power, 1 kHz) Signal Processing Sample Rate 48 / 96 kHz AD/DA Conversion 24-Bit DSP 32-Bit Floating Point DSP Latency At 48 kHz: 1.4 ms (AD/DA Conversion) 0 to 21 ms (DSP) At 96 kHz: 0.7 ms (AD/DA Conversion) 0 to 10.6 ms (DSP) Audio Delay Adjustable Up to 682 ms Crossover Yes EQ 31-Band Graphic EQ 2-Band Parametric EQ 4-Band Parametric EQ 6-Band Parametric EQ 10-Band Parametric EQ 2-Band Shelving EQ Filters High-Pass: 20 Hz to 20 kHz Low-Pass: 20 Hz to 20 kHz Notch/Band-Pass: 20 Hz to 20 kHz Ducking/Muting Yes Compressor Threshold: -20 to +20 dBu Ratio: 1.2:1 to ∞:1 Attack: .2 ms to 50 ms Release: 5 ms to 1000 ms Type: Peak, Average Limiting Brick Wall Connectivity I/O 1 x Euroblock 3-Pin Balanced Line/Mic/Tel/PBX Input 7 x Euroblock 3-Pin Balanced Line/Mic Input 8 x 2RCA Unbalanced Summed-Mono Input 8 x Euroblock 3-Pin Aux Output 1 x Euroblock 8-Pin Speaker Output Digital I/O 1 x RJ45 CobraNet/Ethersound Phantom Power 15 VDC Power AC Power Connector IEC 15 A / NEMA 5-15 Current Consumption 120 VAC: 290 mA (Standby) 565 mA (Idle) 2.78 A (1/8 Power, Typical) 5.78 A (1/3 Power, Max) Physical Thermal Dissipation 46.7 BTU/hr (Standby) 123 BTU/hr (Idle) 232 BTU/hr (Typical) 251 BTU/hr (Maximum) Operating Temperature 40 to 120°F / 4 to 49°C Dimensions 19.0 x 3.5 x 15.5" / 483.0 x 89.0 x 394.0 mm Weight 21 lb / 9.5 kg Packaging Info Package Weight 28 lb