The BenQ WDP01 Wireless FHD Kit will allow you to wirelessly stream uncompressed 1080p video with 3D support to your projector up to 100′ away within line of sight. In addition to the transmitter and receiver, the kit includes a remote control and a mount to attach the receiver directly to the projector. Also included in the kit are an HDMI cable, IR blast cable, and mounting hardware. It is compatible with the BenQ HT1075, HT1085ST, W1070, W1080ST, and W7500 projectors.
Only a few steps are required to set up the kit. Once everything is connected correctly, the transmitter and the receiver will automatically pair up with the projector the first time you power them on – and turn on to reconnect with the projector every time after. To save you from all the cable trouble, the receiver box can be mounted to the right side of the projector and is electronically charged by the projector instead of taking up another power socket.
Fluid Cross-Room Streaming
The WDP01 has wireless coverage of up to 100 feet at line of sight and four built-in antennas to ensure you get a signal through cabinet doors and from one room to the next. It is also designed to deliver a latency-free performance so you can play fast-action and motion-sensing games.
DFS Anti-Interference Performance
The Dynamic Frequency Selection (DFS) technology is designed to deliver a stable HD streaming signal by automatically switching between channels when encountering interference.
BenQ 5J.J9H28.A02 Specs
Compatible Models BenQ HT1075, HT1085ST, W1070, W1080ST, and W7500 projectors
Wireless Range 100.0′ (30.5 m)
Wireless Operating Frequencies 4.9 to 5.9 GHz (including DFS and non-DFS frequency bands)
Antennas 4 x internal
System Latency <1 ms Audio Bit Rate Up to 6 Mbps audio stream Supports AC3 and DTS 2 Channel PCM: 16 ~ 24 bits audio sample with 32 ~ 96 kHz sampling rate Inputs Transmitter: 2 x HDMI 1 x 2.5 mm IR blaster extender 1 x 5 VDC power jack Receiver 1 x 5 VDC mini-USB for power Outputs Transmitter: 1 x HDMI Receiver: 1 x HDMI Switches Transmitter: power, source Receiver: power, source LEDs Transmitter: 1 x power (red/blue); 2 x source (blue) Receiver: 1 x power (red/blue); 2 x source (blue) OSD Signal status Power Supply 100 to 240 VAC in 5 VDC, 2 A out via power adaptor Operating Temperature 32 to 104°F (0 to 40°C) Dimensions Transmitter: 7.2 x 3.8 x 1.2" (18.3 x 9.7 x 3.0 cm) Receiver: 3.7 x 3.7 x 1.2" (9.4 x 9.4 x 3.0 cm) Weight Not specified by manufacturer