Simplify your setup, increase system reliability and go further with Christie Link. Now you can easily send high-bandwidth signals (up to 4K 120 Hz) over long distances (up to 6.2 miles/10 km) directly into the projector on a single-fiber cable without latency or compression.
Key Features
Are designed to work perfectly with Christie Boxer projectors, the ability to manage EDIDs throughout the entire system helps ensure reliable performance
Simplify installation by eliminating a potential point of failure and not requiring a converter at the projector end
Allow each transmitter to be networked so you can configure and monitor the system’s status without having to physically reach the device, and view both the projector it’s connected to and the status of that connection
Christie LINK FIBER TRANSMITTER Specs
General
Device Type Video/audio extender
Form Factor External
Networking
Connectivity Technology Wired
Data Link Protocol HDMI, DisplayPort
Optical Wave Length 850 nm / 1310 nm
Max Resolution 4096 x 2160 @ 60 Hz
Max Transfer Distance 6.2 miles
Features 3D support
Compliant Standards HDCP 1.4, HDCP 2.2
Expansion / Connectivity
Interfaces 2 x DisplayPort (input)
2 x HDMI (input) – 19 pin HDMI Type A
1 x Ethernet 1000Base-T (management) – RJ-45
1 x network – LC single-mode / LC multi-mode
Power
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Dimensions & Weight
Width 11.2 in
Depth 8.7 in
Height 1.7 in
Weight 3.31 lbs
Environmental Parameters
Min Operating Temperature 41 °F
Max Operating Temperature 95 °F
Humidity Range Operating 10 – 80% (non-condensing)
