Description
Colour System: DMD Specification:
Laser Phosphor with colourwheel
Display Type:
1 x 0.66″ WQXGA+ TRP UHD DMD™
Display resolutions 4K-UHD (3840 x 2160)
or WQXGA+ (2716 x 1528)
8.3 megapixels on screen at 4K-UHD
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16:9
Fill Factor
Not applicable: Smooth Picture DMD™
Key Features
Video & Graphics Processing
HDR processing
Two projectors in one – 4K-UHD and WQXGA+.
DisplayPort 1.2.
2 x HDMI 2.0.
2 x HDMI 1.4b for Dual Pipe processing and Frame Sequential 3D format.
Sequential Processing: 3D via single HDMI 1.4b input.
Dual Pipe Processing: 3D Left and Right Eyes via two HDMI 1.4b inputs.
Synchronisation of active glasses.
3G-SDI with loop-through.
DICOM simulation mode.
Geometry Correction
Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.
Non-linear warp.
Digital zoom, pan and scan.
Blanking control for custom input window sizing.
Scaling available for fixed aspect ratio screens.
Unscaled processing for pixel mapped display.
Edge Blending
Blending control available for all sides with width control.
Correction for non-active pixels at the edge of the display.
Picture in Picture
Two sources can be displayed simultaneously using 2D inputs: either picture in picture (PIP), or side by side (PBP), with original aspect ratios maintained.
HDBaseT® Interface
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows projector to be placed up to 100m from source with low cost cabling.
Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:4:4
Colour Processing
Four colour modes available.
Powerful seven point colour correction for accurate colour matching with presets.
Easy colour temperature selection.
Manual seven point colour adjustment.
Traditional lifts and gains.
Projector Controller Software
Intuitive user interface for network control.
Simultaneous control of user-defined groups of projectors.
At-a-glance monitoring of projector status.
Projector Automation
Real-time clock provides daily on/off automation.
E-mail alerts for system status.
Source Compatibility:
2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort inputs.
3D graphics standards up to WQXGA at 120Hz DualPipe via HDMI 1.4b inputs.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
WQXGA+ mode
2D sources up to WQXGA+ at 120Hz can be displayed scaled to fit WQXGA+.
3D sources up to WQXGA at 120Hz can be displayed scaled to fit WQXGA+.
4K-UHD mode
2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD.
Auto mode
Sources greater than WQXGA+ will be displayed scaled to fit 4K-UHD.
Sources up to WQXGA+ will be displayed scaled to fit WQXGA+.