The EX-HDU-R is used to extend HDMI video and USB data on a single Cat6 cable up to 200 ft (60 meters). HDMI audio is extracted and is provided as analog stereo. The EX-HDU-R can also be used to control other equipment by providing programmable contact closure I/O, RS-232 output, IR output. The EX-HDU-R is designed to work with EX-HDU-WP single-gang wall plate transmitter. They connect using standard CAT5e/6 UTP cabling up to 200 feet (60 Meters) long.
The wall-plate Sender gets its power from the Receiver via the same UTP cable and does not need a separate power supply. The plug-and-play extender is compatible with all PCs, MACs and Android Tablets and does not require driver installation. Simply plug the PC’s HDMI and USB ports to the sender and make them available at the remote receiver. The Receiver provides HDMI video output, stereo audio output, 4 USB ports, IR output and a terminal strip that has RS-232 output plus 4 programmable digital I/O ports. A mini-USB port is also provided for configuration upload from a PC for cases where the Receiver is used also as a control system.
Users can upload RS-232 commands to the EX-HDU to control other equipment such as turning a projector on and off. Commands can be triggered automatically by detecting video or by sensing open and close contact events on the I/O ports. For example, a simple toggle switch can be connected remotely to activate RS-232 commands for turning a projector on and off. The I/O ports can be configured to act as INPUTS or OUTPUTS. When an I/O port is configured as OUTPUT, it can trigger relays, for example to lower or raise a motorized projector screen.
Hall Research EX-HDU-R Features
Extends HDMI + USB 2.0 to 200 ft (60 m) on one Cat 6 cable
Supports HDTV resolutions to 1080p 60 Hz
Receiver provides HDMI, 4 USB ports, RS-232 for display control, contact closure I/O, and Stereo Audio outputs
Perfect for Interactive displays, Soft CODECs, and KVM extension
Hall Research EX-HDU-R Specifications
DVI (Single Link)
Input Ports: 1x RJ45, 4x I/O (Relay)
Output Ports: 1x HDMI, 1x 3.5mm Audio, 1x IR
RS232 Port: 1x DB9 Male
4x Type A USB hub port Extension
1x Mini-B USB for configuration
Receiver Baud Rate
HDMI Stereo 2-channel
DVI – VGA (640×480) thru WUXGA (1920×1200)
HDTV – 480p thru 1080p60
(no interlaced support)
Compatible with USB 2.0 and all previous USB standards and data rates.
LPCM 2 Channel Audio (32-192kHz sample rate)
ISTA 1A in carton (International Safe Transit Association)
CE, FCC Class A
90,000 hours (Calculated Estimate)
Storage: -40 to 158 deg. F (-40 to 70 deg. C) / 10% to 90%, non-condensing
Operating: 32 to 122 deg. F (0 to 50 deg. C) / 10% to 90%, non-condensing
100 to 240 VAC, 47-63 Hz, External; 12VDC
12 VDC, 2.0 A Power Supply
Approx. 300-650 mADC depending on Number of connected USB devices
1.18 x 4.13 x 4.57″ (3.00 x 10.49 x 11.61cm)
Depth includes mounting flanges
1.20 lbs (0.54kg)