Note: These cables are designed to extend USB 3.0/3.1 Gen1 signals on any platform. However, they can also support USB 1.1 and 2.0 legacy devices on Windows™ systems.
Available in lengths of 15, 30, 50, 75 and 100 meters, CUSB3V1-AP* cables support transparent extension of USB 3.1 Gen1 Super-Speed at data rates of up to 5 Gbps. It is also downward compatible with USB 2.0 or 1.1 devices. An additional 5 volt regulator on the receiver end will boost the power to compensate for power hungry USB cameras.CUSB3V1-AP* cables are compatible with virtually all USB 3.0 and 3.1 Gen1 devices, and are a perfect solution for extending 4K videoconferencing cameras, video capture, docking stations, and other high-speed data communication.
They also work with USB 2.0 or 1.1 devices although this feature is only available for PCs running Windows™ and needs a driver installation. Driver installation is not required for extending purely USB 3.0 devices on any platform (PC, Mac, Linux).The cable is a light-weight hybrid of fiber and copper, and is plenum rated to ensure compliance with modern building codes. The small cable ends can be easily pulled through most conduit, and no additional power is required, making the CUSB3V1-AP* a true plug-and-play solution.
Data transfer rates of up to 5 Gigabits per second
Offers fiber-optic noise immunity
Provides precise regulated 5v output power at the remote end @ up to 900 ma
Supports all USB 3.0 devices on all platforms
Thin and flexible with bend radius of 0.3 inch
No additional power supply required
Input Male USB 3.0 Type A
Output Female USB 3.0 Type A
Available Lengths 15m (~50ft), 30m (~100ft), 50m (~164ft), 75m (~246ft) and 100m (~328ft)
USB Standards USB 3.0 or USB 3.1 Gen 1
Bandwidth 5 Gbps max
Supply Voltage Powered from USB 5v pin
Nominal: 5v (operating range: 4.7v~5.3v)
Damage will occur if 5v input > 6v
Supply Current Nominal: 50 ma max (not including remote USB device load)
Load Ratings 15 meter: 5V 850 ma
30 meter: 5V 700 ma
50 meter: 5V 700 ma
75 meter: Must use power inserter built into the connector head, power insertion cable included.
100 meter: Must use power inserter built into the connector head, power insertion cable included.
Power Consumption Nominal: 0.25 watts
Grade Plenum CMP (UL)
Diameter 5 mm (0.2 inch)
Bend Radius 8mm (0.3 inch) minimum
Connector Pull Strength 10 Kg (22 lbs) maximum (never pull on the connector, use a pulling sock
Connector Housing Dimensions USB A Male (Host side)
1.4 inch x 0.6 inch x 0.3 inch (35.6mm x 15.3mm x 7.6 mm)
Total length including USB and Strain relief: 2.3 inch (58.4mm)
USB A Female (device side)
1.8 inch x 0.6 inch x 0.3 inch (45.7mm x 15.3mm x 7.6 mm)
Total length including Strain relief: 2.2 inch (55.9mm)
Temperature/Humidity Storage: -4 to +158 °F (-20 to +70 °C) / 5% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 85%, non-condensing
Regulatory EMI/EMC CE, RoHS
CE, FCC Class A