HDBaseT Receiver with dual outputs
With:
2x HDMI Mirror Outputs
Analog Audio Extraction
The ECHO family is a series of extension products designed to allow a single HDMI 2.0 source to display remotely at up to eight different locations, using HDBaseT technology. HDMI resolutions up to 4K UHD ([email protected] 4:4:4) can be extended up to 70m, while resolutions up to 1080p can be extended 100m over a single CAT5e or CAT6 cable. The ECHO family supports HDCP 2.2 and 1.4 content protection, as well as HDR10 high dynamic range video.
In addition to HDMI extension, the ECHO family also extends RS-232 serial data, and bi-directional IR for control of remote devices. All senders include a local HDMI output, EDID routing control, de-embedded analog audio, and Power over Cable (PoC) to power remote receivers. The ECHO-4S and ECHO-8S have built-in HDMI splitters to extend a single video to four and eight receivers respectively and have additional features including RS-232 and IR loop output for daisy-chaining Senders, and digital TOSLINK audio de-embedding.
The ECHO-RX2 receiver has a built-in HDMI splitter for connection to a secondary display, RS-232 and bi-directional IR for control, and de-embedded analog audio output. When used with an ECHO-1S, install the power supply at either sender or receiver – whichever is more convenient.
HDBaseT receiver w/dual HDMI outputs
Extend UHD [email protected] 4:4:4 up to 70m & 1080p up to 100m
HDCP 2.2, HDR10, 3D support
Bi-directional RS-232 and IR control
Audio extraction
EDID management
Locking PoC connector
Video Standards HDMI 2.0 video specifications including HDR10, 3D video
HDCP 2.2, 1.4
DVI (single link)
Video Connectors ECHO-1S – (1) HDMI Input, (1) HDMI Output
ECHO-4S – (1) HDMI Input, (1) HDMI Output
ECHO-8S – (1) HDMI Input, (1) HDMI Output
ECHO-RX2 – (2) HDMI Outputs
Resolutions HDTV signal – 480p through [email protected] 4:4:4
DVI signal VGA (640×480) thru WUXGA (1920×1200)
Audio All HDMI Embedded audio including: LPCM 7.1, Dolby TrueHD, and DTS-HD Master Audio (32-192 kHz sample rate)
Other Signals RS-232
ECHO-1S, ECHO-RX-2
(1) RX, TX and GND on Terminal Strip
RS-232 pass-through
ECHO-4S, ECHO-8S
(2) RX, TX and GND on Terminal Strip (Input and Loop Output)
RS-232 Input Baud Rate: 115200, N, 8, 1 for configuration otherwise pass-through
RS-232 Output to ECHO-RX2 Baud Rate: pass-through
IR Wide-band IR pass-through: 38 – 56 kHz supported
ECHO-1S, ECHO-RX-2
(1) 3.5mm IR Input
(1) 3.5mm IR Output
ECHO-4S, ECHO-8S
(2) 3.5mm IR Inputs (Input and Loop)
(2) 3.5mm IR Outputs (Input and Loop)
USB USB USB 2.0 Micro type B (for firmware update only)
General Power Supply
100 VAC to 240 VAC, 47-63 Hz, External; 24 VDC
ECHO-1S
24 VDC 1A
ECHO-4S
24 VDC 4A
ECHO-8S
MAIN: 24 VDC 2A
PoC: 24 VDC 4A
Temp/Humidity Storage: -40 to +158°F (-40 to +70°C) / 5% to 90%, non-condensing
Operating: +14 to +131°F (-10 to +55°C) / 5% to 90%, non-condensing
Typical Power Consumption ECHO-1S & ECHO-RX2 = 12W total
ECHO-4S & ECHO-RX2 = 15W (Sender) 30W (PoC)
ECHO-8S & ECHO-RX2 = 36W (Sender) 60W (PoC)
Cooling Convection
Enclosure type Metal (Steel)
Dimensions ECHO-1S – 0.82” H x 6.06” W x 3.09” D (22.8mm H x 153.9mm W x 78.5mm D)
ECHO-4S – 1.74” H x 10.64” W x 7.46” D (44.2mm H x 270mm W x 189.5mm D)
ECHO-8S – 1.72” H x 18.9” W x 7.46” D (43.7mm H x 480mm W x 189.5mm D)
ECHO-RX2 – 0.82” H x 6.06” W x 3.09” D (22.8mm H x 153.9mm W x 78.5mm D)
(All dimensions include mounting flange width)
Weight Product
Shipping
Safety CE
EMI/EMC CE, FCC Class A
MTBF 90,000 hours (estimate)
Warranty 3 years parts and labor
