Description
Supporting HDMI signals to be sent over category cable, the KanexPro EXT-HDBT70M UltraSlim UHD 4K/60 HDMI over HDBaseT Extender Set enables extending transmission of HD signals to up to 230′ and UHD 4K up to 131′. It is well suited for use in digital signage applications, as well as for sending HDMI signals in healthcare AV facilities, control rooms, educational facilities, airports, and even in home theater installations. This unit consists of both the transmitter and receiver and supports HD and UHD 4K signals. Following the HDBaseT protocol allows the transmitter and receiver to support PoH (Power over HDBaseT), which allows you to power both transmitter and receiver using only the one included power supply.
The EXT-HDBT70M transmitter/receiver is compliant with HDCP 2.2 and EDID enabling it support HDMI content. 10.2 Gbps of bandwidth allows it to easily support signals up to UHD 4K 30 Hz, at distances up to 131′. The pair supports CEC (Consumer Electronics Control), bidirectional RS-232 and IR control. They are Dolby TrueHD and DTS Master Audio ready and supports LPCM Audio. They also feature LED indicator lights for power, signal (link), and HDCP. Included with the pair are mounting ears and screws, an RS-232 cable, an IR receiver, and a power supply.
KanexPro EXT-HDBT70 Specs
Interface Transmitter Input
HDMI: 1 x type A
Transmitter Output
HDBaseT: 1 x RJ45
Transmitter Control Ports
RS-232: 3-pin captive screw connector
IR: 3.5 mm stereo jack
Receiver Input
HDBaseT: 1 x RJ45
Receiver Output
HDMI: 1 x type A
Receiver Control Ports
RS-232: 3-pin captive screw connector
IR: 3.5 mm stereo jack
Video Signal Input
HDMI 1.4
Output
Digital audio transmitted through HDMI audio
Audio Signal Digital audio transmitted through HDMI audio
Resolutions 800 x 600 to 1920 x 1200
UHD 4K: 30/24
Transmission Mode HDBaseT
Transmission Distance HD: 229.66′ / 70.00 m
UHD: 131.23′ / 40.00 m
Bandwidth 10.2 Gbps
Gain 0 to 10 dB at 100 MHz
Differential Phase Error 310° at 135 MHz-100M
Signal to Noise Ratio >70 dB at 100 MHz-100M
Return Loss ≤30 dB at 5 kHz
THD <0.005% at 1 kHz
Level & Impedance Min/Max: <0.3 to 1.45 V p-p
Impedance: 75 Ohms
HDMI Standards HDMI 2.0
HDCP 2.2
Power Consumption 14 W
Power Supply Input: 100 to 240 VAC, 50/60 Hz
Output: 24 VDC, 1.25 A
Operating Temperature -4 to 140°F / -20 to 60°C
Operating Humidity 10 to 90%
Dimensions 4.53 x 0.64 x 4.29″ / 11.50 x 1.62 x 10.90 cm (each)
Weight Transmitter: 6.8 oz / 193.0 g
Receiver: 6.9 oz / 196.0 g
Packaging Info
Package Weight 2.2 lb
Box Dimensions (LxWxH) 7.25 x 6.25 x 6″
