1-888-525-6696
Search
Search

KanexPro EXT-HDBT70MTX UltraSlim 4K/30 HDMI over HDBaseT Transmitter (130′)

UltraSlim 4K 70 meter HDMI Extender over HDBaseTT Transmitter Only

$262.45

GTIN: 813982021365 SKU EXT-HDBT70MTX Categories ,

Description

Supporting HDMI signals over category cable, the KanexPro EXT-HDBT70MTX UltraSlim 4K/30 HDMI over HDBaseT Transmitter enables extending transmission of HD signals up to 230′. It is well suited for use in digital signage applications, as well as sending HDMI signals in healthcare AV facilities, control rooms, educational facilities, airports, and even in home theater installations. This transmitter unit works with a receiver (not included) and supports HD and UHD 4K signals. Following the HDBaseT protocol allows the transmitter to support PoH (Power over HDBaseT), which allows you to power the transmitter, as well as an optional receiver using only one power supply.

The EXT-HDBT70MTX transmitter is compliant with HDCP 2.2 and EDID, enabling it to support HDMI content. The 10.2 Gbps bandwidth allows it to easily support signals up to UHD 4K 30 Hz, at distances up to 131′. The transmitter supports CEC (Consumer Electronics Control), bidirectional RS-232, and IR control. It is Dolby TrueHD and DTS Master Audio ready and supports LPCM Audio. It features LED indicator lights for power, signal (link), and HDCP. Included with the transmitter are mounting ears and screws, an RS-232 cable, and an IR receiver.

Used to extend transmission distances for HDMI signals up to 230′ over a single Cat 5e/6 cable
It supports control over RS-232 and IR
The transmitter and optional receiver as a pair include both an IR emitter and receiver. This allows you to control a device at the receiver end of the cable run from the transmitter
Receiver can be powered directly by a power supply, or by PoH over HDBaseT from the transmitter (not included)
HDCP 2.2 and EDID compliant

KanexPro EXT-HDBT70 Specs
Interface Transmitter Input
HDMI: 1 x Type A
RS-232: 3-pin captive screw connector
IR: 3.5 mm stereo jack

Transmitter Output
HDBaseT: 1 x RJ45
RS-232: 3-pin captive screw connector
IR: 3.5 mm stereo jack
Resolutions 640 x 480 at 60 Hz to 4Kx2K at 30 Hz
Transmission Mode HDBaseT
Bandwidth 10.2 Gbps
HDMI Standards HDMI 1.4
HDCP 2.2
Impedance 75 Ohms
Power Consumption 14 W (Max)
Power Supply Input: 100-240 VAC, 50/60 Hz
Output: 24 VDC, 1.25 A
Operating Temperature 32 to 122°F / 0 to 50°C
Operating Humidity 10 to 90%
Dimensions 4.53 x 0.64 x 4.29″ / 11.5 x 1.62 x 10.9 cm
Weight 6.9 oz / 196 g
Packaging Info
Package Weight 1.415 lb
Box Dimensions (LxWxH) 7.2 x 6.5 x 5.95″

Additional information

Weight 1.5 lbs
Dimensions 7.2 × 6.5 × 6 in
See any errors on this page? Let us know