Description
Working in conjunction with a separately available receiver, or within an established video network, the KanexPro NetworkAV H.264 HDMI over IP Transmitter can transmit HD video signals over Ethernet for display on a monitor, television, or projector. Using a H.264 compression, Full HD resolution can be maintained without bogging down the network. Since the video is transmitted over IP, standard networking equipment can be used to distribute video. The ability to distribute video from a single source to many displays through an Ethernet switch is great for digital signage and event-space coverage. Multimedia applications can serve video from a selection of sources to a single display using the simple front-panel interface. Other advantages of Ethernet are long cable runs up to 394′, power delivery using PoE, and bidirectional IR and RS-232 control.
Note: Separately available power supply required if PoE is not provided by the network.
DTVGameControl
KanexPro EXT-AVIPH264 Specs
Inputs 1 x HDMI Type A
Outputs 1 x RJ-45, Ethernet
1 x HDMI Type A, loop output
1 x 3.5mm IR
Other I/O 1 x 3-pin Phoenix, RS-232
1 x 3.5mm, IR ext
Input Resolutions 1080p at 24/25/29.97/30/50/59.94/60 Hz
1080i at 50 Hz
720p at 50/59.94/60 Hz
576p at 50 Hz
480p at 59.94/60 Hz
NTSC
PAL
Protocol H.264 over TCP/IP
Transmission Distance 394′ / 120 m
Audio Format LPCM, 48 kHz sampling rate
Bit-Rate 15 Mbps
IR Frequency 38-56 kHz
RS-232 Baud Rate: 2400 bps (default)
Power Supply 5 VDC, 1 A
Power Consumption 3 W (maximum)
Operating Temperature 23 to 95°F / -5 to 35°C
Operating Humidity 5-90% RH, non-condensing
Dimensions 4.7 x 3.1 x 1.1″ / 12 x 8 x 2.8 cm
Weight 9.9 oz / 280 g
Packaging Info
Package Weight 1.49 lb
Box Dimensions (LxWxH) 8.3 x 6.25 x 2.25″
