Vaddio 999-95450-500 RoboSHOT 12E HDBT OneLINK HDMI System for Polycom Codecs

For Cisco Telepresence SX20, SX80 or C-Series codecs; compatible with legacy RoboSHOT 12 HDMI and RoboSHOT 30 HDMI cameras.

Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.

More Flexibility for Room Design and Installation

Tailored for Cisco codec systems and compatible with RoboSHOT HDMI cameras, this OneLINK codec kit provides more freedom of choice for camera selection and equipment placement.

Benefits:

• More flexibility in camera and/or codec placement – no longer dependent on the location of the codec
• HDBaseT interface extends power, video and control up to 328 feet/100 meters – Cisco systems can now go into larger rooms
• Plug and play usability
• Intuitive browser-based user interface for configuration and system administration

Please note: When connecting a Cisco SX20 codec to a OneLINK HDMI, you will need to provide a Cisco CAB-PHD4XS2-SPLIT cable.

Combine the RoboSHOT 12E HDBT camera with the OneLINK HDMI receiver to extend power, video and control over a single cable for simple, tidy installation. This bundle includes RoboSHOT Elite Series camera, necessary Polycom cables, and OneLINK HDMI. Recommended for large conference rooms, training rooms, and classrooms that are connecting to a Polycom RealPresence codec.

Key Features:

12x Optical Zoom
1/2.5-type Exmor R CMOS sensor
70.2° horizontal field of view
Simultaneous HDbaseT, HDMI and IP H.264 streaming
Remote IP Management
Simple, clutter-free camera extension with HDBaseT technology
Power, video and control over a single Cat-5e cable up to 230 ft. (70m), or over a Cat-6 cable up to 328 ft. (100m)
Simultaneous HDMI and IP Streaming outputs

This Package Includes:

• OneLINK HDMI Interface
• OneLINK HDMI EZIM with mounting screws
• Quick-Start Guide
• 48V power supply with AC cord set(s)
• 1′ (0.3m) cat-5 cable, black
• 3′ (0.9m) cat-5 cable, black
• 3′ (0.3m) directional cat-5 cable for Cisco SX20**
• 1′ (0.3m) HDMI cable
• 3′ (0.9m) HDMI cable
• 1′ (0.3m) EIAJ-04 to EIAJ04 power cable for camera
• EZCamera RS-232 Control Adapter 998-1002-232 for Cisco codec serial 9-pin ports