Vaddio 999-9560-000 Cisco Codec Kit for OneLINK HDMI to Cisco Cameras

The Cisco Codec Kit for OneLINK HDMI to Cisco Cameras from Vaddio provides an HDBaseT interface that extends HDMI video, codec over RS-232, and network over a single Cat6 cable to distances up to 328′ from the camera interface EZIM to the OneLINK receiver device. The OneLINK Codec Kit lets you use the Cisco camera in larger rooms with the added flexibility of connecting to any cloud conferencing software.

The system consists of a OneLINK EZIM camera interface at the camera location, and a OneLINK HDMI interface at the codec end. The EZIM provides the required camera connectivity and is mounted onto the back wall of a heavy-duty gusseted wall bracket with the included mounting accommodation for the Cisco camera.

The Cisco Codec kit comes with a mount and mounting hardware, two HDMI cables, two Ethernet cables, camera cable, and a power cable.

Compatibility Cisco Precision 60 PTZ camera
Cisco SX-80 codec
Control Types Ethernet and RS-232
Cabling Single Cat5e or better cable between the OneLINK Interface and the OneLINK EZIM
Transmission Range 328′ / 100 m over Cat5e
Resolution Up to 1080p60, 2160p30
Connectors OneLINK HDMI Interface:
RJ45 shielded, interconnection
HDMI, video output
RJ45 shielded, Ethernet
RJ45 shielded, RS-232
2.5 x 5.5 mm DC barrel, power input
3-Pin Phoenix, IR forward

OneLINK EZIM:
RJ45 shielded, interconnection
HDMI, video input
RJ45 shielded, Ethernet
RJ45 shielded, RS-232
EIAJ-04, power output
Mount EZIM Flange Bolt Hole:
2 x Holes at 0.175″ / 4.44 mm
2.5″ / 63.5 mm on-center spacing
Power Supply 48 VDC, 1.36 A
Dimensions OneLINK HDMI Interface:
1.7 x 8.4 x 6.0″ / 43.7 x 212.7 x 152.4 mm

OneLINK EZIM
3.9 x 4.3 x 1.2″ / 98.1 x 109.5 x 31.5 mm
Weight OneLINK HDMI Interface:
1.6 lb / 703 g

OneLINK EZIM:
0.6 lb / 250 g
Packaging Info
Package Weight 10.7 lb
Box Dimensions (LxWxH) 13.1 x 10.2 x 6.9″