Yamaha CXS18XLFW 18″ Subwoofer, White

Priced and sold as individual.

The white Yamaha CXS18XLF is a passive subwoofer designed for extending the low frequency of full-range speakers and is well suited for use with any of the CZR-series powered loudspeakers. The subwoofer requires 1000W of power to drive the 18″ woofer, providing a frequency range of 32 Hz to 150 Hz (-10 dB) with a maximum SPL of 133 dB.

Yamaha recommends the use of a DSP speaker processor or a power amplifier with integrated DSP, such as Yamaha’s PX Series amplifiers, in order to set crossovers, limiting, and equalization to ensure the best performance. Additionally, two or more subwoofers can be deployed with a cardioid configuration (DSP dependent), which can effectively reduce stage volume, while increasing low-end output directed at the audience. The rear panel offers three Neutrik speakON NL4MP connectors, which are configured with two input/parallel connectors for multiple subwoofers plus one output connector for flexible set up to full-range CZR loudspeakers or cardioid mode setting. The Yamaha CXS18XLF is equipped with both a 35mm pole socket and an M20 threaded socket to support a full-range cabinet.

General Features
Passive reflex subwoofer
Woofer: 18″ with 4″ voice coil
Ideal for low-frequency extension to all full-range loudspeakers
Maximum SPL: 133 dB
Frequency range (-10 dB): 32 to 150 Hz
High-power 1000W (PGM) input
Cardioid mode capable with processors or DSP onboard power amps
3 x speakON NL4MP (2 x parallel, 1 x output)
Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
Dual-pole socket
Optional speaker cover (SPCVR-DXS18X) and wheel kit (SPW-1)

Yamaha CXS18XLFW Specs

PA Speaker
Configuration Passive Subwoofer
Enclosure Type Bass-Reflex Subwoofer
Total Power Capacity
500 W RMS
1000 W Program
2000 W Peak
System Impedance 8 Ohms (Nominal)

Drivers
LF Driver 1 x 18″ / 457.2 mm Woofer
LF Voice Coil 4″ / 101.6 mm
Magnet Ferrite

Performance
Frequency Range 32 Hz to 150 Hz -10 dB
Maximum SPL 133 dB (Peak)
Speaker Sensitivity 100 dB

Connectivity
Audio I/O
2 x speakON NL4 Input/Thru
1 x speakON NL4 Output

Physical
Mounting
1 x 1.4″ / 35 mm Pole Socket (Top)
1 x M20 Pole Socket (Top)
Handles 1 x Each Side
Construction Material Plywood
Dimensions 21.7 x 25.9 x 28.3″ / 550 x 657 x 720 mm
Weight 96.1 lb / 43.6 kg