Yamaha DZR12W Powered Speaker – 2000W, 12″ Lf, 2″ Hf Comp Driver, White

Priced and sold as individual.

The white Yamaha DZR12 is a 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D bi-amp powers the 12″ woofer and 2″ compression driver, which combine to provide a frequency range of 39 Hz to 20 kHz (-10 dB) with a maximum SPL of 139 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt it to the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.

The onboard 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR12 is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multiband compressor that ensures the DZR12’s sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.

The rear panel offers two combo XLR-1/4″ inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The Yamaha DZR12 ships with a standard IEC power cord.

General Features
2-way powered loudspeaker
HF: 2″
LF: 12″
Ideal for FOH/Main or floor monitor applications
Maximum SPL: 139 dB
Frequency range (-10 dB): 39 Hz to 20 kHz
High-power 2000W Class-D amplifier module
Floor monitoring setting enables mirroring configuration
Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
Rotatable horn
Variety of optional U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
Optional speaker cover available (SPCVR-DZR12)
Advanced FIR-X Tuning
96 kHz DSP processors help focus the power output of the DZR12 into high-resolution sound with super-low latency
Yamaha’s Advanced FIR-X tuning improves significantly on their proprietary FIR-X tuning technology which utilizes linear phase FIR filters for the crossover network and correct EQ
Using FIR filters, Yamaha was able to realize very smooth frequency response for remarkable clarity and sound imaging without phase distortion
Accurate EQ filtering is also provided for pinpoint adjustment to realize ideal clarity and SPL without signal degradation
An onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and make precise adjustments to PEQ, delay, and routing
Store up to 8 user presets to save your own parameter adjustments, or use the optimized dedicated factory presets for using DZR and DXS XLF Series in combination
Users can easily transfer saved settings to a USB flash drive
D-Contour
D-CONTOUR is an intelligent multiband compressor that ensures your DZR’s sound stays consistent and clear no matter how hard you drive them
By constantly monitoring the output of multiple frequency bands and applying the optimum EQ adjustments for each, even the highest output levels maintain outstanding clarity and musicality
D-CONTOUR provides settings for the FOH/Main and Monitor modes
FOH/Main: Boosts the lower frequencies to compensate for low end that is typically missing when speakers are used in suspended applications
Monitor: Optimized for floor monitoring application by taming down problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to help deliver clarity
Presets were created by performing countless listening tests with skilled sound engineers to ensure consistent sound with low distortion at any output level
DSP Protection
DSP protection functions for maximum output and component longevity
Active loudspeakers ensure the combination of transducers and amplifiers are matched and optimized for the best possible performance
During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha’s DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability

Yamaha DZR12 Specs

PA Speaker
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity
2000 W Peak
950 W RMS
Amplifier Power Rating
LF:
1000 W Peak
850 W RMS
HF:
1000 W Peak
100 W RMS
Amplifier Class Class-D

Drivers
HF Driver 1 x Rotatable Horn Titanium Compression Driver with 1″ / 25.4 mm Throat
HF Voice Coil 2″ / 50.8 mm
LF Driver 1 x 12″ / 30.5 cm Woofer
LF Voice Coil 3″ / 76.2 mm
Magnet
HF:
Neodymium
LF:
Neodymium

Performance
Frequency Range 39 Hz to 20 kHz -10 dB
Maximum SPL 139 dB
Coverage Angle
90° H x 60° V (Rotatable Horn)
60° H x 90° V (Monitor)
Max Input Level
Line Input:
+24 dBu
I/O Impedance
Input:
20 Kilohms

Connectivity
Audio I/O
2 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Input
2 x XLR 3-Pin Male Balanced Output
USB 1 x USB Type-A (External Memory, Host Connection)

Signal Processing
Crossover 1.8 kHz
Max Sample Rate/Resolution 96 kHz

Power
AC Input Power
Universal:
100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC (Locking)
Power Consumption
45 W (Idle)
150 W (1/8 Power)

Physical
Mounting
12 x M10 Fly Point
2 x 1.4″ / 35 mm Pole Socket (Dual Angle, Bottom)
Monitor Angle 50°
Handles 1 x Each Side
Cooling Fan (Variable Speed)
Construction Material Plywood
Dimensions 16.1 x 25.4 x 15.5″ / 410 x 646 x 394 mm
Weight 47.2 lb / 21.4 kg