Description
The Ashly SRA-2150 is a 2-channel convection-cooled rackmount studio PA, or power amplifier, housed in a rugged 1RU metal chassis. Offering an output of 80 watts per side at 8 Ohms, it is designed to drive 4- and 8-Ohm loads.
The SRA-2150 incorporates a switch-mode power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable high-pass filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and dual or bridged modes of operation.
The SRA-2150 is equipped with a front-panel headphone monitoring output, an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.
1RU, 9 lb lightweight rackmount stereo power amplifier with 80 watts per side power output at 8 Ohms
Selectable Stereo or Bridged Mono Operation, designed for 4- or 8-Ohm loads
2-stage high-efficiency switched-mode power supply with high power-to-weight ratio
Ultra-quiet convection-cooled operation
Onboard 80 Hz HPF, selectable gain sensitivity
Up to 8 sec of turn-on delay with selectable DIP switch complement
Comprehensive amplifier protection circuitry includes: Output Over-Current, DC Output, Main Supply Rail Over-Voltage, Chassis Temperature, Inrush Limiting, Mains Fuse
Front-Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicators
Euroblock input connectors, screw-terminal outputs
Ashly SRA-2150 Specs
Number of Channels 2
Power Rating 8 Ohms:
80 W per Channel
300 W Bridged
4 Ohms:
150 W per Channel
Amplifier Class Class-D
Performance
Protections On/Off Muting
Frequency Response 20 Hz to 20 kHz ±1 dB
Damping Factor > 200 at 8 Ohms
Input Sensitivity +1 dBu or +4 dBu
Input Impedance 20 Kilohms (Balanced)
Max Gain 36 dB
SNR > 105 dB
THD 8 Ohms:
< 0.01% (Full Range, at Rated Power -10 dB)
Signal Processing
Filters 2 x High-Pass:
80 Hz
Connectivity
I/O 2 x Euroblock 3-Pin Input
2 x Screw Terminal Output
1 x 1/4" TRS Headphone Output
Power
Current Consumption 0.35 A (Idle)
1.1 A (1/8 Power)
Power Consumption 4 Ohms:
37.5 W (1/8 Power)
Physical
Display & Indicators 1 x Blue LED (Power)
1 x Yellow LED (Standby)
1 x Red LED (Protect)
2 x Red LED (Clip)
2 x Green LED (Signal)
Cooling Convection
Dimensions 19.0 x 1.8 x 11.0" / 48.3 x 4.5 x 27.9 cm
Weight 9 lb / 4.1 kg
Packaging Info
Package Weight 14 lb
Box Dimensions (LxWxH) 19 x 11 x 3"