Hall Research CNT-IP-264 Programmable Video over IP Controller (For FHD264 Family)

Programmable Video over IP Controller (for FHD264 family)


Hall Research CNT-IP-264 Programmable Video over IP Controller (For FHD264 Family)

GTIN: 608415712350 SKU CNT-IP-264 Category

Product Description

The CNT-IP-264 is an IoT device providing global/master control of video-over-LAN network with multiple FHD264 encoders and decoders. It lists all video transmitters and receivers with their user defined names and allows switching of video using drop down menus. Users can also create custom control buttons for Serial-over-IP or Telnet control of other equipment and even schedule events. The CNT-IP-264 can turn your IP-based HDMI video distribution system into a GUI-based virtual matrix switch. The CNT-IP-264 can also act as a universal controller with advanced GUI and scheduling capabilities. When connected to the same network as the FHD264 HDMI-over-IP products, it scans the network, lists and identifies all Senders and Receivers by their user assigned name.

• Plug and Play, no installation required
• Embedded WEB Server with Graphical User Interface
• Control FHD-264 video over IP routing from a single global GUI
• Control External Devices over Serial (SOIP), Telnet or TCP
• Create custom control for external devices
• Real time event scheduling with Real-Time clock
• Compatible with Hall Research Device Finder Utility
• Supports DHCP

Other parameters such as IP and Mac address, model number, encoding bit rate, etc. are also accessible. A matrix page allows quick routing of the video from any sender to any Receiver using drop-down lists. When used as a control system, it can control other devices such as TVs, projectors or motorized screens. Since the FHD264 HDMI-over-IP codecs have RS232 ports, the controller can send RS232 commands to external devices though them. For example if an FHD264 Receiver’s RS232 port is connected to a projector, you can create a button on the GUI to turn the projector on and off. You can also schedule actions such as changing video routing or powering TVs based on time of day. Users can create a control webpage with buttons to send Telnet or RS232 commands.

IoT Controller with Web server
• Designed to control FHD264 Encoders and Decoders on the network
• Switch the multicast groups (video channels) of FHD from easy to use matrix layout on the WEB-GUI
• Can be extended to control any IoT Device that supports Telnet/TCP
• 3rd party devices can be added to control list
• Custom buttons and actions can be created on WEB-GUI to control your devices

HHD264 device finder
• Scans FHD264 on the network and dynamically generates the information on the web page
• Information Displayed: Names of Encoders and Decoders, Current group of TX / RX, Video status, Links for all the encoder/decoder inbuilt WEB-GUIs

SoIP (Serial Over IP)
• Send serial commands to control the serial devices connected to FHD264 RS232 port
• Supports Full Duplex serial communication
• Logs the serial response in WEB-GUI (SOIP console)
• Custom buttons can be created to output RS232 commands from any FHD on the network

• Schedule events at different frequencies: Once, Daily, Weekly and Monthly
• Dynamic web page that shows the countdown of each events
• Events: Changing FHD264 video multicast groups (channels)
• Telnet/TCP commands