Hall Technologies UH18-S 4K Video and USB HDBaseT 2.0 Extender (Sender ONLY)

HDMI + USB + LAN over UTP Extender with HDBaseT and PoC (Sender)


Hall Technologies UH18-S 4K Video and USB HDBaseT 2.0 Extender (Sender ONLY)

SKU UH18-S Categories , Tag

Product Description

The UH18 extends HDMI Video, USB, IR, and RS-232 on a single CAT6 cable to over 100 meters. It is perfect for allowing access to a PC from a remote user location and can be used to place the PC in a secure location away from the user station. The Sender provides local HDMI loop output as well as a USB hub so users can access the PC locally as well as from a remote station.

The extender kit consists of a Sender (UH18-S) and Receiver (UH18-R). Power, USB, RS-232 and IR (remote) signals are extended on the same cable. The power supply can be connected at either end of the extender.

The UH18 provides 18 Gbps video bandwidth and supports HDMI resolutions up to and including 4K @ 60 Hz 4:4:4 (UHD). The Sender has a built in video splitter and features a convenient local HDMI video output connector.

USB 2.0 extends from a USB host connected at the Sender. Both the Sender and the Receiver have USB hubs with two USB device ports for connecting USB devices such as a keyboard, mouse, touch screen, printer, flash drive, web cam or other USB 1.1/2.0 device.

The extender kit also provides a user selectable “LONG REACH” mode. In this mode, the extender kit can support distances to 150 meters (500 feet) with a maximum resolution of 1920×1080 (1080p).

For extra convenience the remote receiver de-embeds HDMI audio and provides both analog (L/R stereo on 3.5mm jack) as well as digital SPDIF via RCA. This is a perfect for connecting a pair of speakers at the remote location using the Hall Research AMP-4840 audio amplifier.

Hall Technologies UH18-S 4K Video and USB HDBaseT 2.0 Extender (Sender ONLY) - Hall Technologies

Hall Technologies UH18-S 4K Video and USB HDBaseT 2.0 Extender (Sender ONLY) - Hall Technologies

Extends [email protected] up to 100 m and [email protected] up to 150m
HDMI 2.0, HDCP 2.2 compliant and supports HDR10
Perfect for KVM Extension (accessing a PC from a remote location)
HDMI loop-output on the Sender
Audio Extraction on the Receiver(Analog and SPDIF)
Support LPCM 7.1, DTS-HD, Dolby-HD
Fully compliant with HDBaseT™ 2.0 specifications
Bi-directional IR and RS-232 Pass through
Plug and Play Installation – takes minutes to setup
EDID Management
Only one power supply needed (power is sent over UTP cable to other side)
Perfect for Server Rooms with local and remote access to the PCs

Video Standards
HDMI 1.4/2.0 and HDCP 1.4/2.2
DTV/HDTV up to [email protected] YUV 4:4:4
Audio HDMI
LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby TrueHD and DTS-HD Master Audio
Analog (Line Level) and SPDIF
Note: Analog output is only active when the HDMI Audio is 2-channel. SPDIF output is always active regardless of audio format of 2.0, 5.1 or 7.1 channels
Peripherals RS-232
Full Duplex Pass-through at any baud rate
Supports all USB 2.0/1.1 Devices
Bi-directional Pass-through 56K carrier
Power Input
100-240 VAC, 50-60 Hz 0.8 A (US/EU Standard, CE/FCC/UL Certified)
24 VDC @ 1.0 A
14 Watts
DAL POC (Power only required at one end)
Temperature Storage: +32 to +140 °F (0 to 40 °C) / 5% to 90%, non-condensing
Operating: +32 to +104 °F (0 to 40 °C) / 5% to 90%, non-condensing
Enclosure Metal (Steel)
Dimensions 6.87” (172.4 mm) W × 4.45” (113.2 mm) D × 0.95” (24 mm) H
All protrusions included
Weight Product
1.3 Lbs

5.2 Lbs (Sender + Receiver)
Safety CE
MTBF 90,000 estimated
Warranty 3 years parts and labor