VGA & Dual HDMI Auto-Switching Wall-Plate with HDBaseT Kit
$1,350.66
The UHBX-SW3 is a kit comprised of a multi-input wall-plate sender and an HDBaseT™ receiver. The wall-plate accommodates 2 HDMI and 1 VGA inputs with audio. The VGA input also accepts YPbPr Component video. The sender can manually or automatically switch between the various inputs and extends the video using HDBaseT™ standard. To control the power on/off function of the remote display, the wall-plate can generate RS232, and IR control signals which are extended using the same Cat6 cable. Virtually all VGA and HDMI resolutions are supported including 4K (UHD). 4K video can be extended to 330 ft (100m) while 1080p signals can go as far as 500 ft (150m). The wall-plate is powered through the same cable from the receiver using PoH (Power-over-HDBaseT) standard, making installations as simple as possible. The UHBX-R-PSE receiver includes a small power supply and provides HDMI, RS-232 and IR outputs.
To ensure a proper image on the display, the wall-plate’s VGA input is scaled to 1080p. This eliminates compatibility issues with various notebook or PC VGA formats that may not be displayable on an HDMI TV if not scaled to a standard HDTV resolution such as 1080p. The user can also configure the unit to pass-through 3.5 mm audio input from an MP3 audio player independent of the VGA signal.
The system can manually or automatically control the power on/off function of the remote display. If a video is detected on the input, in automatic power mode, the wall-plate will issue the desired ON command, and if there is no video, it can issue an OFF command after a programmed delay. The power commands can be RS232, or IR based on the user’s needs. To select the control method and to enter the commands, a USB port is provided on the wall-plate for programming using Hall Research’s free Windows® GUI software. In addition, the wall-plate features an IR detector that can extend IR signal to the remote receiver. In this way, an IR remote can be pointed to the wall-plate and its signal will be extended to the TV.
The UHBX-SW3 complies fully with HDBaseT Alliance’s design specifications and may be connected to displays or projectors with HDBaseT inputs without the external receiver. In that case, a PoH compliant power inserter would be needed to power the wall-plate.
The UHBX-SW3 is a culmination of Hall Research’s expertise in high-definition analog and digital video scaling and extension technologies and is fully designed and manufactured in the USA.
2 HDMI inputs and 1 VGA input
Supports all HDMI resolutions including 4K (UHD)
VGA input is scaled to 1080p to ensure proper image on all HDMI displays
Manual or automatic input selection
Automatic Control of display power via RS-232
Uses only one Cat6
Distance to 500 ft (150m) at 1080p, or 330 ft (100m) at 4K resolution
IR Extension
Wall plate Uses PoH and does not require a separate power supply
Charges mobile sources while showing video
USB port and free Windows® software for easy configuration
Video Inputs 2x HDMI, 1x HD15 (VGA or YPbPr)
Video Output HDBaseT (100m/330ft @1080p)
Video Connectors HDMI Female, HD15 Female, RJ45 for HDBaseT output
Input Standards HDMI 1.4, DVI 1.0, VESA VGA, NTSC 3.58
HDCP Support Yes, v1.4 (Repeater)
Video Bandwidth HDMI 25MHz-300MHz TMDS Clock, VGA 350MHz, YPbPr
Supported Resolutions HDMI 480p to 4K UHD, VGA 640×480 to 1920×1080, YPbPr
Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
Audio Inputs Unbalanced stereo audio for VGA input (Line Level)
Audio Connectors 3.5mm Mini-stereo, Female
Frequency Response 20Hz ~ 20KHz
Control Mini-USB (GUI setup)
Programmable push buttons (Input selection and Power toggle)
RS-232 transmit
IR transmit (pass-through or generated)
Auto-switching, auto-power on/off available
External keypad (“Aux CTRL”) port
Power Supply Device is PoH ‘PD’ (Powered Device); receives power from compatible ‘PSE’ (Power Sourcing Equipment) Receiver
Power Consumption (3.0A @ 5V w/UHBX-R-PSE – 15 Watts max)
Mounting 2-Gang Low Voltage wallplate box
Clearance: 3.7″ Horizontal x 2.8″ Vertical Opening
Supported VGA Resolutions Detailed Timings
1920 x 1080 60hz
1360 x 768 60hz
1280 x 720 60hz
Established Timings
640 x 480 60hz
800 x 600 60hz
1024 x 768 60hz
Standard Timings
1280 x 720 16:9
1280 x 1024 5:4
1280 x 960 4:3
1280 x 800 16:10
1600 x 1200 4:3
1680 x 1050 16:10
1440 x 900 16:10
Free shipping on new projectors $199 or more.
We are an authorized dealer for every brand we sell.
Special pricing for preffered customers and dealers.
We are projector experts, with over 20 years of service.
From projectors to projection screens, digital signage to gaming equipment, PSSAV is Your number one source for audio visual equipment. over 200 top brands including Sony, Nec, Epson, Optoma, Benq, Chief, Dalite, Viewsonic, LG and more..