Hall Technologies UV1-S-WP Video over UTP Wall Plate Sender

Video over UTP Wall Plate Sender


Hall Technologies UV1-S-WP Video over UTP Wall Plate Sender

SKU UV1-S-WP Category

Product Description

The UV1-S-WP Mini-Cat® transmits Video and Phantom Power over UTP (Cat5/5e/6) cable up to 500 feet to compatible Receiver (UV1-R or UV1-R-WP). It is constructed as a single gang wall plate with a shallow depth so that it can mount into any size Junction Box. The UV1-S-WP Mini-Cat® supports PC resolutions up to 1920 x 1440 or HDTV resolutions to 1080p. The unit includes a 9 VDC Universal power supply that supplies power to the Receiver via the UTP cable.

Single gang wallplate construction saves space and simplifies installations
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480p to 1080p.
Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for High-Resolution A/V extension
Amplifies the signal for clean and crisp transmission
Differential signaling eliminates ground loops and noise
Sends a VGA or Component Video Signal on Cat5/5e/6 cables to 500 feet
Includes a power supply that connects to the transmitter on screw terminals and can be remotely located using low-voltage wiring.
Transmits power to the remote receiver
Can be powered from the receiver side over the Cat5 cable (if a power supply is attached to the receiver)
LED for power-good indication (blinks if there is insufficient power voltage)

Dimensions Single Gang Wall Plate
Weight 2 lbs. (shipping)
Power Supply From utility-power (mains) outlet, through included external power adapter. Output Voltage: 6v to 9v DC Center-Positive. Current requirement 500 ma max
Max Distance Up to 500 ft. (150 m) for VGA and Component Video
Resolution Up to 1920 x 1440 non-interlaced at 60Hz
Standards VGA, SVGA, XGA, or UXGA video
Video types VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr