Hall Technologies UV4-S Video and Phantom Power over UTP Extender

Video and Phantom Power over UTP Extender


Hall Technologies UV4-S Video and Phantom Power over UTP Extender

GTIN: 724696530060 SKU UV4-S Category

Product Description

The Model UV4-S is a 4-channel video splitter that can send a VGA or component video signal to multiple displays on CATx cable. This unit features a standard HD15 VGA connector for the input and has 4 RJ45 connectors for the outputs. It also provide an additional HD15 VGA connector for a local monitor.

The UV4-S can drive UTP cables of lengths up to 500 feet. At the remote (receiving) end of the cable, a model # UV1-R is required to convert the UTP cable signal back to video for connection to a monitor.

In most setups only one power supply is necessary for the entire system.

The UV4-S Sender/Splitter comes with a power supply that is capable of powering itself and all the UV1-R receivers.

For Cat5 runs of over 300 feet, the receivers may need their own additional supplies that must be ordered separately (HRT model # 511-PS9016A).

Made in the USA.

Hall Technologies UV4-S Video and Phantom Power over UTP Extender - Hall Technologies

Support for local monitor at transmitter
Multiple Cat-5 outputs
Transmit video and phantom power on a single CATx cable
Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution video extension
Amplifies the signal for clean and crisp transmission
Differential signaling eliminates ground loops and noise
Handles resolutions up to 1920×1440 at 60Hz
Rugged, Reliable, Compact size
Single power supply fpr transmitter and all UV1-R receivers (under 300 ft)
Drive standard CATx cables to 500 feet for VGA and Component Video

Video Gain Unity
Standards VGA, SVGA, XGA, or UXGA video
Video Types VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr
Resolution Up to 1920×1200 and 1080p at 500 ft
Video # and Type 1 analog signal input. Standard VGA output RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync)
Connectors 4 or 8 female RJ-45 output
1 HD15 video input
1 HD15 local video output
Nominal Amplitude 1 V p-p for Y of component video
0.7 V p-p for RGB and for Pr and Pb of component video
4.0 V to 5.0 V p-p, for TTL Sync signals of RGBHV, RGBS
Impedance 75 Ohms
Max Distance Up to 500 ft. (150 m) for VGA and Component Video
Sync Polarity Positive or Negative
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 9 VDC regulated, Center Positive
Recommended Cable Hall Technologies Zero-Skew™
Temp/Humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
Enclosure Steel
Dimensions 1.66″ H x 8.42″ W x 2.60″ D
(42.2mm H x 214mm W x 66mm D)
Depth excludes connectors
Shipping Weight 3.0 lbs (1.36 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Safety CE
MTBF 90,000 hours (Calculated Estimate)