JBL CBT 100LA-LS-WH Line-Array Column Loudspeaker with EN54:24 Certification (White)

Description

The white CBT 100LA-LS-WH Line-Array Column Loudspeaker from JBL contains 16 drivers (2” each) and features the Constant Beamwidth Technology which utilizes complex analog delay beam-forming and amplitude-tapering to achieve consistent vertical coverage, avoiding narrow vertical beaming and out-of-coverage lobing. The vertical pattern coverage is switchable between 40° for medium-throw coverage and 15° for long-throw applications. This EN54:24 certified loudspeaker comes with a built-in 70/100V transformer, plus 8 ohms direct capability.

Constant Beamwidth Technology provides constant directivity up to high frequencies and reduces out-of-coverage lobing
EN54:24-compliant (when installed with the included MTC-PC2 Panel Cover)
Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications
Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
Dynamic SonicGuard overload protection
Swivel (pan)/tilt wall bracket included
Built-in 70/100V transformer, plus 8 ohms direct capability
MTC-PC2 Weatherproof Panel provides protection for the input connections of the loudspeaker

JBL CBT 100LA-LS Specs
Components 16 x 2″ (50 mm) full-range
Frequency Range -10 dB: 120 Hz to 20 kHz
Coverage Pattern Vertical:
Narrow Mode: 15° (2 to 16 kHz) (±10°)
Broad Mode: 40° (1 to 16 kHz) (±10°)
Horizontal: 150° (ave, 1 to 4 kHz, ±20°)
Sensitivity 2.83 V @ 3.3′ (1 m):
Narrow: (Speech mode) 96 dB (2 to 14 kHz); (music mode) 93 dB (300 Hz to 18 kHz)
Broad: (Speech mode) 93 dB (2 to 14 kHz); (music mode) 90 dB (300 Hz to 18 kHz)
EN54 Sensitivity @ 13 (4 m); 76 dB (per EN54:24 spectrum and measurement conditions at 13′ (4 m), set at broad/music mode)
Nominal Impedance 8 ohms (in Thru mode)
15 W @ 70 V; 30 W @ 100 V Tap = 333 ohms
30 W @ 70 V; 60 W @ 100 V Tap = 167 ohms
60 W @ 70 V; 120 W @ 100 V Tap = 83 ohms
120 W @ 70 V; N/C @ 100 V Tap = 42 ohms
Power Capacity 8 ohms Setting:
325 W (1300 W peak), 2 hours
200 W (800 W peak), 100 hours
Max SPL Level Narrow: (speech mode) 121 dB cont ave (127 peak); (music mode) 118 dB cont ave (124 peak)
Broad: (speech mode) 118 dB cont ave (124 peak) (music mode) 115 dB cont ave (121 peak)
EN54 maximum SPL @ 13′(4 m) 92 dB (per EN54:24 spectrum and measurement conditions, at 13′)
Transformer Taps 70/100 V:
120, 60, 30 W (15 W at 70 V only), and 8 thru, via switch
Axes Specification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle.
Enclosure Fiberglass-reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille
Outdoor Use IP-55 rated, per IEC529, when installed with included MTC-PC2 Panel Cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray
Insert 18 x M6 insert points on back panel
Mounting Included swivel (pan)/tilt wall bracket provides continuously variable +/-80-degree left-right swivel aiming (at no up/down tilt)
Continuously adjustable ±15-degree tilt, as well as 5 degrees fixed increment points. 18 threaded mounting points located on back panel conform to industry-standard rectangular 4.25 x 2.0 (108 x 51 mm) pattern for OmniMount 30.0 and other compatible brackets. Threaded mounting points can be utilized for suspension.
Safety Agency Approval EN54-24:2008 certified (Certificate No. 0359-CPR-00432), when installed with MTC-PC2 terminal panel cover. Cabinet UL94-5VB flammability rated. In accordance with the requirements of IEC60849/EN60849.
Transformer UL registered per UL1876
Dimensions (H x W x D) 39.4 x 3.80 x 6.00″ (100.0 x 9.85 x 15.3 cm)
Weight 15.8 lb (7.2 kg)