JBL CBT 50LA-LS-WH Constant Beamwidth Technology CBT 50LA-LS Line Array Column Loudspeaker with Eight 2″ Drivers (White)

Description

The white Constant Beamwidth Technology CBT 50LA-LS Line Array Column Loudspeaker from JBL utilizes analog delay beam forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

The slim, compact design fits well into virtually any architectural decor. The combination of excellent sound quality and pattern control, and compact (20.8″ tall x 3.9″ wide) design makes the CBT 50LA-LS Line Array Column Loudspeaker suitable for a wide variety of applications, such as retail stores, concourses, transit spaces, fill applications, conference rooms, architectural spaces, audio for video, lecture halls, and other applications where such a combination is desired.

The voicing can be set to match the application through the Music/Speech switch, conveniently located on the side of the cabinet. The Music setting provides flat frequency response, while the Speech setting produces a mid-range presence boost to provide clear, intelligible speech even at the longest throw distances.

The shielded drivers feature dual neodymium magnets for light weight. Copper-capped pole pieces lower the driver inductance and flux modulation. This increases high frequency extension and reduces distortion at high drive levels. Butyl rubber surrounds provide long life even in high humidity environments.

Dynamic SonicGuard overload protection minimizes distortion at high drive levels by limiting low frequency excursion dynamically. This maximizes clarity at high drive levels while protecting the drivers from damage due to overpowering.

A swivel (pan) / tilt wall-mount bracket is included, and ten M6 inserts on the back panel accommodate third-party mounting brackets, or can be utilized to suspend the speaker using M6 forged shoulder steel eye bolts, providing versatility of installation. The loudspeaker can be installed either indoors or outdoors. The drivers are weather treated, and the fiberglass reinforced ABS cabinet with UV resistant paint is suitable for outdoor applications. The external stainless steel screws and the painted aluminum grille resist rusting in harsh conditions.

Constant Beamwidth Technology provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
EN54-24 compliant (when installed with included MTC-PC2 panel cover)
Switchable voicing provides flat response in Music mode or mid-range presence peak in Speech mode
Dynamic SonicGuard overload protection
Built-in 70V / 100V transformer, plus 8Ω direct capability
Swivel (pan) / tilt wall bracket included

JBL CBT 50LA-LS Specs
Components 8 x 2″ (50 mm) full-range drivers
Frequency Range 120 Hz to 20 kHz, -10 dB (full space)
Coverage Pattern Vertical: 20° (1.5 to 16 kHz, ±10°)
Horizontal: 150° (average, 1 to 4 kHz, ±20°)
Coverage Angle 4000 Hz: 18° (H) x 140° (V)
2000 Hz: 32° (H) x 210° (V)
1000 Hz: 55° (H) x 260° (V)
500 Hz: 100° (H) x 260° (V)
Sensitivity 1W/1m, Full Space
93 dB (Speech mode, 2 to 14 kHz), 89 dB (Music mode, 300 Hz to 18 kHz)

1W/4m, Full Space
89 dB (Speech mode, 2 to 14 kHz), 77 dB (Music mode, 300 Hz to 18 kHz)
Power Capacity 8 Ω Setting: 150 W (600 W peak), 2 hours
100 W (400 W peak), 100 hours
SPL Maximum @ 3.3′ (1 m):
Speech Mode: 115 dB continuous averaged (121 peak)
Music Mode: 111 dB continuous averaged (117 peak)

Maximum @ 13.1′ (4 m):
Speech Mode: : 103 dB continuous average (109 peak)
Music Mode: 99 dB continuous average (105 peak)
Impedance 8 Ω (in bypass mode)

Taps:
667 Ω (7.5 W @ 70 V; 15 W @ 100 V tap)
333 Ω (15 W @ 70 V; 30 W @ 100 V tap)
167 Ω (30 W @ 70 V; 60 W @ 100 V tap)
83 Ω (60 W @ 70 V; N/C @ 100 V tap)
Transformer Taps 70 V / 100 V: 60 W, 30 W, 15 W, (7.5 W at 70 V only), and 8 Ω thru, via switch
Enclosure Fiberglass reinforced ABS cabinet (UL94-5VB and UL94-5VA flammability-rated), painted aluminum grille
Outdoor Durability IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover
UV, moisture, and 200 hour ASTM G85 acid-air/salt-spray resistant
Rigging Points 10 x M6 swivel (pan)/tilt insert points on back panel
Mounting Included swivel (pan) / tilt wall bracket provides continuously variable ±80° left-right swivel aiming
Continuously adjustable ±15° tilt, as well as 5° fixed increment points within the range
Safety Agency Approvals EN54-24:2008 certified (Certificate No. 0359-CPR-00238), when installed with MTC-PC2 terminal panel cover. In accordance with the requirements of IEC60849/EN60849.
Dimensions (H x W x D) 20.8 x 3.9 x 6.0″ (52.8 x 9.9 x 15.3 cm)
Weight 9.0 lb (4.1 kg)
Packaging Info
Package Weight 16.45 lb
Box Dimensions (LxWxH) 29.5 x 12.4 x 8″