Description
With its six input sources and six zone outputs, the OWI Inc. HP-AMP-250BT rackmount 250W Bluetooth-enabled amplifier offers the flexibility and connectivity to serve as the centerpiece of a sound system in commercial installation applications such as restaurants, retail stores, hotels, clubs, and more.
The rear panel provides inputs to connect microphones, line-level sources, and stereo music players while the front panel features an onboard MP3 player that supports an SD card and USB media. Plus, the integrated Bluetooth receiver allows wireless streaming of audio from your Bluetooth-enabled mobile device. The outputs on the HP-AMP-250BT enable it to deliver 250W at 4 to 16 ohms or properly drive 70/100V speakers. The built-in mixer boasts 2-band EQ, master volume, and independent level controls for all sources and zone outputs.
2 RU amplifier/mixer capable of single- or 6-zone operation
250W at 4 to 16 ohms or 70/100V usage
Six sources—one XLR-1/4″ mic input, two XLR-1/4″ mic/line inputs, two 1/4″ mic inputs, three stereo aux inputs—plus an onboard MP3 player (via SD card or USB media) and a Bluetooth input
Main volume control, 2-band EQ, and independent level controls for all sources and zone outputs
Mic 1 priority with mute function
Mono RCA coaxial send and return jacks
4- to 16-ohm, 70V, and 100V outputs mounted on binding posts, zone outputs on screw terminals, and an XLR mixed-level preamp output (pre-fader to the main volume)
Power, signal, peak, and fault indication
5-segment signal-level indication
Short-circuit, overheating, DC offset, and limit protection
Soft clip limiter protection
Toroidal output transformers provide extended high-frequency response and effectively lower the electrical interference
Power-up muting
AC powered with a 24 VDC backup power supply
Temperature-controlled, high-efficiency fan cooling
OWI Inc. HP-AMP-250BT Specs
Amplifier
Form Factor/Type Rackmount
Number of Channels 2
Number of Zones 6
Power Rating 4 Ohms / 8 Ohms / 16 Ohms:
250 W
70 V / 100 V:
250 W
Connectivity
Audio I/O 1 x Combo XLR-1/4″ TRS Balanced Mic Input (Locking)
2 x Combo XLR-1/4″ TRS Balanced Mic/Line Input (Locking)
2 x 1/4″ TS Unbalanced Mic Input
3 x Stereo RCA Coaxial Unbalanced Aux Input
1 x RCA Coaxial Unbalanced Send
1 x RCA Coaxial Unbalanced Return
1 x XLR 3-Pin Balanced Preamp Output
Other I/O 1 x BNC Bluetooth Antenna Input
Speaker Outputs 6 x Screw Terminal 70 V Zone
1 x Binding Post Pair 100 V
1 x Binding Post Pair 70 V
1 x Binding Post Pair Low-Z
USB 1 x USB Type-A
Media/Memory Card Slot Single Slot: SD/SDHC
Power
AC Input Power 110 VAC, 60 Hz
AC Power Connector 1 x IEC
DC Input Power 24 VDC
Physical
Rackmount Size 2 RU
Dimensions 19.0 x 3.9 x 15.7″ / 48.3 x 9.9 x 39.9 cm
Weight 24 lb / 10.9 kg
