Description
Priced and sold as individual.
The white Yamaha CZR12 is a 2-way passive loudspeaker designed for main/FOH and floor monitor applications. From live bands at outdoor festivals to DJ’s in clubs, the speaker is well suited for a range of live performance and installed sound environments. The CZR12 requires 800W of power to drive the 12″ woofer and 2″ compression driver, which combine to provide a frequency range of 43 Hz to 20 kHz (-10 dB) with a maximum SPL of 129 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt the acoustic dimensions of a venue. The constant directivity (CD) horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.
To maximize performance, the CZR12 can be configured for bi-amplification, which allows two independent amplifier channels to power the woofer and compression driver separately. Yamaha recommends the use of a DSP speaker processor or a power amplifier with integrated DSP, such as Yamaha’s PX Series amplifiers, in order to set crossovers, limiting, and equalization to ensure the best performance. The rear panel offers two Neutrik SpeakON NL4MP connectors, which are configured in parallel and allow for additional speakers to be daisy-chained. There are twelve M10 rigging points for permanent installations as well as two pole cups (0 & -7°) for deploying in a mobile setting.
General Features
2-way loudspeaker
HF: 1″ throat compression driver with 2″ voice coil, titanium diaphragm, and neodymium magnet
LF: 12″ with aluminum die-cast frame, 3″ voice coil, and neodymium magnet
Wide dispersion CD waveguide horn
800W (PGM) power handling
Bi-amp capable
Floor monitoring setting enables mirroring configuration
Rotatable horn
Lightweight yet very durable plywood cabinet with premium graded Polyurea coating
Dual-angle pole socket
Optional speaker cover (SPCVR-DZR12)
Variety of U-bracket options (UB-DZR12H/V) for rigging allow for very flexible setup and speaker placement
Yamaha CZR12W Specs
PA Speaker
Configuration Passive 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity
Passive:
400 W RMS
800 W Program
1600 W Peak
Bi-Amp / LF:
400 W RMS
800 W Program
1600 W Peak
Bi-Amp / HF:
50 W RMS
100 W Program
200 W Peak
System Impedance
8 Ohms (Passive)
LF:
8 Ohms (Bi-Amp)
HF:
16 Ohms (Bi-Amp)
Drivers
HF Driver 1 x Rotatable Horn Titanium Compression Driver with 1″ / 25.4 mm Throat
HF Voice Coil 2″ / 50.8 mm
LF Driver 1 x 12″ / 30.5 cm Woofer
LF Voice Coil 3″ / 76.2 mm
Magnet
HF:
Neodymium
LF:
Neodymium
Performance
Frequency Range 43 Hz to 20 kHz -10 dB
Maximum SPL
129 dB SPL (Peak, Passive)
129 dB (LF, Peak, Bi-Amp)
131 dB SPL (HF, Peak, Bi-Amp)
Coverage Angle
90° H x 60° V (Rotatable Horn)
60° H x 90° V (Monitor)
Speaker Sensitivity
Passive:
97 dB SPL
Bi-Amp/LF:
97 dB
Bi-Amp/HF:
108 dB SPL
Connectivity
Audio I/O 2 x speakON NL4
Signal Processing
Crossover 2 kHz
Physical
Mounting
12 x M10 Fly Point
2 x 1.4″ / 35 mm Pole Socket (Dual Angle, Top)
Monitor Angle 50°
Handles 1 x Each Side
Construction Material Plywood
Dimensions 16.1 x 25.4 x 15.5″ / 410 x 646 x 394 mm
Weight 39.7 lb / 18 kg
