AMX FG1061-634 Enova DGX DXLink 4K60 Fiber Output Board

Description

The Enova DGX DXLink 4K60 Fiber Output Board is HDMI 2.0 and HDCP 2.2 compliant. It supports 4K60 4:4:4 video and High Dynamic Range (HDR) for optimum image quality and pixel-for-pixel image reproduction without chroma subsampling. DXLink 4K60 Fiber allows end users to realize the full potential of their source and display devices by fully supporting 36-bit Deep Color for the richest, most realistic video.

This board has four outputs and transmits audio, video, control, USB 2.0, and Ethernet over duplex fiber up to 300 meters away to a DXLink 4K60 Fiber receiver. Each output includes a Multi-Mode Duplex (MMD) SFP, which can be replaced with a Single-Mode Duplex (SMD) SFP if needed. This board is compatible with Enova DGX 100-Series enclosures and DXLink 4K60 Fiber receivers.

Fiber uses light to distribute data rather than electric signals making it both the highest quality and most secure way to transport video as it is not susceptible to electronic noise or non-intrusive physical wiretapping.

Enova DGX 100-Series enclosures already deployed in the field can be easily upgraded to support superior video quality by adding or swapping in new Enova DGX DXLink 4K60 Fiber boards and endpoints. This underscores the AMX commitment to ensure a future-proof Enova DGX family that is designed to evolve with advances in technology.

Common Applications
This output board is ideal for applications where the demands of high-resolution video clarity, long distance transmission, and maximum security need to be met without compromise, including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas, and museums

Connectors (4)Duplex LC Fiber Ports, conforming to ANSI TIA/EIA 604-10 (FOCIS 10A), (4) Mini-USB AB Ports

Compatible Formats HDMI Video, Audio, Ethernet, USB(HID), USB (2.0), Serial Control, and IR Control

Signal Type Support DXLink Multimode Fiber, Duplex
NOTE: DXLink 4K60 Fiber boards ship with Multimode Duplex Fiber SFP+ modules installed. These can be field replaced with compatible 10G Single-mode Duplex Fiber SFP+ modules in applications where single-mode fiber is required.

Maximum Resolution Support
480p up to 3840×2160 @ 60Hz 4:4:4 and 4:2:2, including:
3840x2160p@50/60 Hz, 4:2:0
4096x2160p@50/60 Hz, 4:2:0

Audio Format Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD MA, DTS-HD High Resolution, DTS, 2 CH through 8 CH L-PCM
– Dolby Digital and DTS support up to 48 kHz, 5.1 Channels
– When a downstream DXFP-RX- 4K60 is in the signal path, audio formats other than 2CH LPCM and Dolby Digital 5.1 require the DXFP-RX-4K60 to have its scaler set to bypass.

AIE Board Support Yes, supports insertion of 2 CH LPCM

Audio Switching Board Support Supports break-away audio switching of 2 CH L-PCM for all channels
Supports downmix from one input channel of Dolby Atmos, Dolby True-HD, Dolby Digital Plus, Dolby Digital, DTS-HD MA, DTS-HD High Resolution, DTS, or 2 to 8 channel L-PCM
– Downmix supported on 4k video inputs with pixel clocks up to 297MHz (up to 3840x2160p @ 30Hz)

USB USB HID and USB 2.0 are supported point-to-point to DXLink 4K60 HDMI Receivers.
The DXLink Output board is automatically configured as either Host or Device depending on the mode selected on the attached DXLink 4K60 Receiver.

Compatible DXLink TX/RX DXLink 4K60 Fiber Receivers (DXFP-RX-4K60)

FG Numbers FG1061-634