Description
The Ashly TRA-2075 is a 2-channel convection-cooled rackmount P.A. or installation power amplifier housed in a rugged 2-RU metal chassis. The unit offers an output of 40 Watts per side at 8 Ohms, an output of 75 Watts per side at 8 Ohms, and is designed to drive 4-and 8-Ohm loads and transformer-coupled 70V and 100V lines simultaneously. The coupling transformers are internally mounted.
The TRA-2075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay, and rear-mounted set-and-forget gain controls.
The TRA-2075 is equipped with an internally switchable 120/240V power supply and extensive protection circuitry, along with standard Euroblock inputs and Euroblock outputs.
2-RU rackmount stereo power amplifier with 40 Watts per side power output at 8 Ohms and built-in 60W/70V transformer
Designed to simultaneously drive 4- or 8-Ohm loads and 70/100V transformer-coupled lines
2-stage high-efficiency switched-mode power supply with high power-to-weight ratio
Ultra-quiet convection-cooled operation
Onboard 80 Hz HPF, selectable gain sensitivity
Up to 8 sec. of turn-on delay with selectable dip switch complement
Comprehensive amplifier protection circuitry includes: output over-current, DC output, main supply rail over-voltage, chassis temperature, inrush limiting, and mains fuse
Front panel indicators include: overall power, standby, and protect—along with per-channel clip and signal indicators
Euroblock input and output connectors
Ashly TRA-2075 Specs
Number of Channels 2
Power Rating 8 Ohms:
40 W per Channel
4 Ohms:
75 W per Channel
70 V / 100 V:
75 W per Channel
Performance
Protections On/Off Muting
Frequency Response 20 Hz to 20 kHz ±1 dB
Damping Factor > 200 at 8 Ohms
Input Sensitivity +1 dBu or +4 dBu
Input Impedance 20 Kilohms (Balanced)
Max Gain 36 dB
SNR > 100 dB
THD 8 Ohms:
< 0.5% (Full Range, at Rated Power -10 dB)
Signal Processing
Filters 2 x High-Pass:
80 Hz
Connectivity
I/O 2 x Euroblock 3-Pin Input
2 x Euroblock Output
Power
Current Consumption 0.3 A (Idle)
0.69 A (1/8 Power)
Power Consumption 4 Ohms:
18.75 W (1/8 Power)
Physical
Display & Indicators 1 x Blue LED (Power)
1 x Yellow LED (Standby)
1 x Red LED (Protect)
2 x Red LED (Clip)
6 x Green LED (Level/Signal)
4 x Yellow LED (Level/Signal)
Cooling Convection
Dimensions 19.0 x 3.5 x 12.0" / 48.3 x 8.9 x 30.5 cm
Weight 19.9 lb / 9 kg
Packaging Info
Package Weight 19 lb
Box Dimensions (LxWxH) 24 x 16 x 4"