Description
The white AL7115 Single 15″ Low-Frequency Speaker Module from JBL is equipped with the patented JBL 2265 HPL Differential Drive 15″ transducer, which features a Differential Drive, dual 3″ voice coil – dual magnetic gap transducer. The 1000 watt rated speaker is mounted in a front-loaded, vented configuration. The trapezoidal cabinet is fitted with M10 threaded suspension points for array flying and mounting, with pre-engineered array bracketry available as an option.
The AL7115 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of applications. It is designed to work with the AM7200 models in a low-profile array application where a full-range three-way system is desired. Complementing the AM7200/64 and AM7200/95, the AL7115 15″ low-frequency speaker module, when utilizing the optionally purchased PAF-3K planar array frame kit, can be fitted between two AM7200 mid-high loudspeakers, creating a low-profile, three-wide array system.
1 x 15″ 2265H Differential Drive Low- Frequency Driver
Large vent area for high output with low distortion
Arrays with various AE Series mid-high frequency and compact 2-way models
Applications include:
Performing arts facilities
Theatrical sound design
Auditoriums
Houses of worship
Live clubs
Dance-clubs/discotheques
Sports facilities
Themed entertainment venues
JBL AL7115 Specs
Frequency Range 40 Hz to 4.2 kHz (-10 dB)
Frequency Response ± 3dB 47 Hz to 3.0 kHz
Transducer Power Rating 1000 W (4000 W peak), 2 hours (AES)
Long-Term System Power Rating 600 W (2400 W peak), 100 hours (IEC)
Maximum SPL 50 Hz to 125 Hz: 127 dB-SPL cont. avg. (133 dB peak)
125 Hz to 800 Hz: 126 dB-SPL cont. avg. (132 dB peak)
System Sensitivity @(dB SPL, 1W @ 1m)
50 Hz to 125 Hz: 97 dB
125 Hz to 800 Hz: 97 dB
Nominal Impedance 8 ohms
Low Frequency Driver 1 x JBL 2265H 15″ (380 mm) Differential Drive driver with 3″ (75 mm) dual voice coil
Enclosure Trapezoidal with 15 degree side angles
5/8″ (16 mm) exterior grade 11-ply Finnish birch plywood
Suspension Support 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish White DuraFlex™ finish
Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
Input Connectors NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals
(Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 0.375″ (9 mm) spade lugs
Speakon in parallel with barrier strip for loop-through
Environment Requirements Mil-Std 810
IP-x3 per IEC529
Dimensions (H x W x D) 21.6 x 22.1 x 25.9″ (548 x 561 x 657 mm)(vertical cabinet orientation)
Weight 57 lb (25.9 kg)
