Description
Sold as a pair, the white JBL Control 25AV-WH is a passive 5.25″ shielded loudspeaker with a low-saturation transformer designed for voice amplification and foreground music reproduction in a variety of indoor and outdoor venues. The 60W transformer allows the Control 25AV-WH to be driven by 70V, 100V, or 8-Ohm power amplifiers (available separately). Each Control 25AV-WH is equipped with a durable 5.25″ woofer and a 0.75″ titanium-coated tweeter, yielding a frequency range of 70 Hz to 23 kHz, and a continuous program power capacity of 200W.
The 12 dB/octave crossover network ensures proper frequency distribution to the speaker components as well as smooth tone. SonicGuard circuitry protects against damage incurred through overloading without compromising sound quality. The screw-down terminal strip enables simple wiring, and utilizes nickel/zinc terminals for enhanced resistance to rust. The supplied InvisiBall mounting systems and input panel covers contribute to ease of installation.
High-impact polystyrene enclosures with magnetic shielding for use near video monitors
Included InvisiBall mounting systems are simple to install, aim easily, and provide a high degree of theft deterrence
100° x 100° high-frequency horn
Low-saturation 60W transformer enables use with 70V/100V constant-voltage systems, and offers a bypass position for use in an 8-Ohm setup
200W continuous program power handling
Durable 5.25″ polypropylene-coated woofer with WeatherEdge surround
0.75″ titanium-coated, horn-loaded tweeter
70 Hz to 23 kHz frequency range (-10 dB)
12 dB/octave crossover network with high- and low-pass filtering
Screw-down terminal strip—with zinc-plated copper base and nickel-plated metal screws/washers—accepts up to 9mm outside and 4mm inside open lug (#6, #8 or #10), plus bare wire (up to 12 AWG)
Aurally transparent SonicGuard circuitry features full-range power limiting to protect network and transducers, plus an internal fuse to protect during exceptional overload conditions
JBL Control 25AV Specs
Speaker
Active or PassivePassive
Speaker Configuration2-Way
Power HandlingFor 100 Hours:
200 W Program
100 W RMS
Constant Voltage / Transformer Taps100 V:
15 / 30 / 60 W or 8 Ohms Bypass
70 V:
7.5 / 15 / 30 / 60 W or 8 Ohms Bypass
Impedance6.7 Ohms (Minimum)
8 Ohms (Thru Setting)
ShieldedYes
Drivers
HF Driver0.75″ / 2 cm Titanium-Coated PEI Tweeter
LF Driver5.25″ / 13.5 cm Polypropylene-Coated Paper Woofer
LF Voice Coil1″ / 2.5 cm
Performance
Frequency Range70 Hz to 23 kHz -10 dB
Maximum SPL113 dB (Peak)
107 dB (Continuous)
Sensitivity87 dB SPL
Coverage Angle100° H x 100° V
Directivity4.9 (Directivity/Q Factor)
6.9 dB (Directivity Index)
CrossoverLow-Pass:
12 dB/Octave
High-Pass:
12 dB/Octave
ProtectionsAC Fuse, Overvoltage
Connectivity
I/O ConnectorsScrew Terminal
Maximum Wire Gauge12 AWG
Environmental
CertificationsUL, as per Manufacturer
IP RatingIPX4
Physical
ColorWhite
Rotation Range44° H x 37° V (Ball Mount)
44° H x 44° V (Bracket Mount)
Construction MaterialHigh-Impact Polystyrene, Stainless Steel Grille
Dimensions9.3 x 7.4 x 6.3″ / 23.6 x 18.6 x 15.9 cm
Weight9 lb / 4 kg
Packaging Info
Package Weight20.75 lb
Box Dimensions (LxWxH)15.4 x 10.5 x 9.6″