JBL CONTROL 26-DT Coaxial Ceiling Speaker Assembly with Transformer (MUST BE PURCHASED IN PAIRS)

Description

The JBL Control 26DT is a 6.5″ coaxial ceiling installation speaker assembly, offering a 90° coverage angle, a built-in 70/100V transformer with a 60-watt power handling capacity, and a 1″ titanium-coated tweeter for even dispersion and directionality.

The Control 26DT assembly is designed as a substitute for standard 8″ configurations, and provides even, wider-dispersion coverage, with particular HF clarity via the diffraction-loaded tweeter, for venues with medium-high ceilings.

Coaxial ceiling installation speaker assembly with built-in 70/100V multi-tap transformer and 90° coverage angle
6.5″ woofer matches industry mechanical specifications for standard 8″, fits most standard 8″ backcans
Grille or backcan mountable
Advanced crossover network for natural sound and even coverage throughout designated listening area
Rugged, humidity-resistant coaxial woofer with durable butyl rubber surround, titanium-coated tweeter
High 60-watt transformer power handling, wider frequency response and lower distortion design for higher quality sound reproduction

Wider coverage with even projection allows for fewer speakers, reduces installation cost

JBL Control 26-DT Specs
Active or Passive Passive
Frequency Response 95 Hz – 18 kHz (-3 dB)
Power Capacity 60 Watts (transformer)
Maximum Sound Pressure Level (SPL) 106 dB @ 3.3 ft / 1 m
Nominal Sensitivity 89 dB SPL, 1 W @ 3.3 ft / 1 m
Transformer Taps 70 V Taps: 60, 30, 15, 7.5W
100 V Taps: 60, 30, 15W
Impedance 80 Ohms min. @ 247 Hz (60 Watts)
Crossover 3.5 kHz
Shielded No
Low-Frequency Driver 6.5″ Polypropylene-coated, 1″ coil on aluminum former
High-Frequency Driver .75″ Titanium coated polyester
Mounting 4 screw holes at 7.6″ / 194 mm diameter on center
Input Connections Screw-locking Barrier Strip
Environmental In accordance with IEC60849/EN60849 Safety Rating
Dimensions (HxD) 4.72 x 7.87″ / 120 x 200 mm
Weight 4.2 lb / 91.9 kg
Specialties Coaxial Speaker Design
Multi-tap Transformer for 70 and 100V Systems
Fits most Backcans
90° Coverage Pattern
Packaging Info
Package Weight 11 lb
Box Dimensions (LxWxH) 21.6 x 10.2 x 6.5″