Description
The white JBL Control HST is a single two-way 100W passive wallmount speaker offering extremely wide coverage and a broad frequency response for music reproduction and paging applications in a variety of indoor and outdoor environments such as stores, restaurants, educational facilities, hotels, and lobbies.
The ABS enclosure features a wall-facing 5.25″ woofer and dual horizontally splayed 0.75″ fluid-cooled tweeters, enabling the Control HST to deliver a 160 x 150° pattern control while producing a 50 Hz to 20 kHz frequency range (-10 dB) devoid of the primary reflection that normally plagues wall-mounted speakers, making it ideal for reducing the number of speakers in a setup without sacrificing coverage area or fidelity.
An integrated 60W multi-tap transformer allows the Control HST to be used in 70/100V, or 8-ohm system configurations at selectable wattage settings. Boasting IP54 and Mil-Std-810 ratings for resistance to water, humidity, and more, the Control HST is a capable speaker for a range of locations. It includes a color-matched U-bracket for simplified wallmount installation.
Note:
The Control HST is designed for wall mounting only; do not mount it in a corner or onto a pole.
Dual horizontally splayed 0.75″ fluid-cooled tweeters for high output, low distortion, and humidity resistance
Wall-facing 5.25″ woofer with a CMMD ceramic metal matrix diaphragm
HST Hemispherical Soundfield Technology provides extremely wide horizontal coverage that approaches 180 degrees (covering a greater area with fewer speakers) and reduces the primary wall reflection to yield a flat frequency response and consistent sound character at all listening positions
100W (400W peak) power handling for two hours
50 Hz to 20 kHz frequency range (-10 dB)
Integrated 60W multi-tap transformer allows 70/100V, or 8-ohm operation
Built-in passive high-slope crossover network
Removable locking Euroblock connector with screw-down input and loop-thru terminals
Sealed cabinet features fiberglass-reinforced construction with an aluminum grille
IP54 and Mil-Std-810 rated for resistance to humidity, salt spray, temperature, and UV damage
Includes a heavy-duty, weather-capable U-bracket for easy mounting (wall mounting required)
JBL CONTROL HST-WH Specs
Speaker
Active or Passive Passive
Number of Included Speakers 1
Speaker Configuration 2-Way
Power Handling For 2 Hours:
100 W Program
400 W Peak
For 100 Hours:
75 W Program
300 W Peak
Constant Voltage / Transformer Taps 70 V:
60 / 30 / 15 / 7.5 W or 8 Ohms Bypass
100 V:
60 / 30 / 15 W or 8 Ohms Bypass
Impedance 8 Ohms (Nominal)
Transformer Wattage 60 W
Enclosure Type Sealed
Shielded No
Drivers
HF Driver 2 x 0.75″ / 1.91 cm Aluminum Tweeter
LF Driver 1 x 5.25″ / 13.34 cm Woofer
LF Voice Coil 1″ / 2.54 cm
Magnet HF:
Neodymium
Performance
Frequency Range 50 Hz to 20 kHz -10 dB
Frequency Response 68 Hz to 18 kHz ±3 dB
Maximum SPL 108 dB (Continuous)
114 dB (Peak)
Sensitivity 88 dB (Average)
Coverage Angle 160° H x 150° V
Directivity 5.4 (Directivity/Q Factor)
7.2 dB (Directivity Index)
Crossover High-Pass:
1.6 kHz, 18 dB/Octave (Passive)
Low-Pass:
1.6 kHz, 12 dB/Octave (Passive)
Connectivity
I/O Connectors 1 x Euroblock 4-Pin Speaker Input/Thru (Locking, Removable)
Maximum Wire Gauge 12 AWG / 2.5 mm
Environmental
Water / Weather Resistance Humidity Resistant, Water Resistant
IP Rating IP54
Physical
Color White
Mounting 4 x M6 Bracket Point (Rear)
1 x M6 Suspension (Rear)
Construction Material ABS, Aluminum Grille, Fiberglass
Dimensions 14.25 x 10.1 x 7.2″ / 36.2 x 25.65 x 18.29 cm
Weight 8 lb / 3.6 kg (Each Speaker, without Bracket)
9.5 lb / 4.3 kg (Each Speaker, with Bracket)
Packaging Info
Package Weight 12 lb
Box Dimensions (LxWxH) 16.9 x 13.3 x 11.2″
