Description
The HDSC31D-4K 3-Input DisplayPort, HDMI, & VGA Switcher Scaler over HDBaseT from KanexPro is designed for sending video and control signals up to 230′ over a shielded Catx cable to an HDBaseT receiver. It supports resolutions up to 4K @ 30 Hz. The sender or receiver can be powered from either side, requiring only one power supply supporting POE (Power over Ethernet) and allowing you to switch between the sources while upscaling or downscaling to the desired resolution.
DisplayPort, HDMI, and VGA inputs are built into the transmitter (sender) with one HDBaseT output and serial control. This Collaboration Switcher supports video signal resolutions up to 4K, including 1920 x 1200 and 1080p60 Deep Color. The HDSC31D-4K offers reliable switching and transmission of DisplayPort, HDMI, and analog video signals with HDCP 2.2 compliancy. Additionally, RS-232 and IR remote control facilitate integration.
Reliable switching with selectable output resolutions up to 4K @ 30Hz
3D, 1080p @ 60 Hz, 36-bit; 4K2K @ 30 Hz, 24-bit
VGA supports scaling resolutions up to 720p, 1080p, and 1600 x 1200 @ 60 Hz
Bidirectional POE support (Tx to Rx/Rx to Tx)
Bidirectional IR control, front-panel, and RS-232 pass-through
Supports CEC and HDCP 2.2 compliant
Locking power supplies
Compact and slim design for flexible installation
Includes mounting kits
International power supply
Low profile design and remote power (POE) capability enable discreet placement in lecterns and beneath tables in conference rooms, board rooms, or smart classrooms
KanexPro HDSC31D Specs
Input
Video 1 x HDMI
1 x VGA
1 x HDBaseT
Signal DP/HDMI/VGA
IR 1 x 1 IR In (3.5 mm mini jack)
Output
Video 1 x HDMI
1 x HDBaseT
Signal HDMI Video
IR 1 x 1 IR Out (3.5 mm mini jack)
Video
Resolution HDMI: Up to 4K/30 Hz
DisplayPort: 4K/30 Hz, 1920 x 1200, and 2560 x 1600
VGA: 1024 x 768, 1280 x 720, 1280 x 800, 1600 x 1200, and 1920 x 1080
Maximum Pixel Clock 165 MHz
Gain 0 dB
Standards HDMI, DisplayPort, HDCP:
Compliant with DVI & HDMI 1.4 standards, HDCP 2.2
Compliant to the VESA DisplayPort standard, version 1.1a, for both 1.62 Gbps & 2.7 Gbps
Supports resolutions up to 4K @ 30 Hz
Bandwidth HDMI: 10.2 Gbps
Output 75 Ohms
Level Input/Output: 0.5 to 2 Vpp
Audio
Input HDMI/DP audio via HDMI, DP connectors
Input Impedance >10 kOhms
Output Via HDMI
Output Impedance 50 kOhms
Frequency Response 20 Hz to 20 kHz
CMRR >90 dB @ 20 Hz to 20 kHz
Audio Format: HDMI
Embedded Audio: PCM, Dolby DTS
Stereo Channel Separation >80 dB @ 1 kHz
General
Control IR remote, buttons, and RS232; Phoenix connectors
Pin Configuration 2=TX, 3=RX, 5=GND
Power Supply 24 VDC, 1 A
Power Consumption Approximately 10 W
Temperature 32 to 113°F (0 to 45°C)
Humidity 10 to 90%
Dimensions Tx: 2.9 x 7.6 x 0.7″ (7.5 x 19.3 x 1.8 cm)
Rx: 2.9 x 5.7 x 0.7″ (7.5 x 14.5 x 1.8 cm)
Weight Tx: 13.4 oz (380 g)
Rx: 10.2 oz (290 g)
Packaging Info
Package Weight 2.395 lb
Box Dimensions (LxWxH) 11.25 x 5.65 x 2.85″
