Nady DW-22-HT Digital Dual Transmitter Fixed Frequency Wireless Handheld Microphone System

Digital Dual Transmitter Fixed Frequency Wireless Handheld Microphone System


GTIN: 634343117875 SKU DW-22-HT Categories , Tag


The Nady DW-22-HT Dual Digital Wireless system, comes with two exceptional sounding Digital-HT handheld microphone wireless transmitters. This budget friendly “plug-and-play” system is ideal for presenters, performers, and interviewers alike.

– User Friendly. Fixed channel and frequency make operation very simple. Just turn the system on and it’s set to go!
– State-of-the-art, professional 24-bit digital conversion technology for exceptional audio clarity with transparent frequency response across the entire audible range (20Hz to 20,000Hz). The truest possible sound with undetectably low latency.
– Clear Signal operation in 900 MHz Band. Completely free from TV interference.
– Reliable long range operation. Digital transmission virtually eliminates interference from nearby obstacles and noise from your audio. Extended operating range up to 300 feet line-of-sight.

– Sleek, rugged ABS housing for long-term durability.
– Front panel: AF / RF LED’s for monitoring RF and audio signals, backlit panel display showing pre-selected channel and operating frequency, power switch, and separate Ch. A and Ch. B volume controls
– Back panel: Dual fixed balanced XLR MIC level audio out, and adjustable ¼” LINE level out, DC input jack, and rotatable, swivel attached dual antennas.
– Externally powered with included universal 110V-220V AC / 13.5 VDC regulated 400mA adapter.
– Optional RMT-1KUD available for rack mounting single or dual receivers.

– Convenient, economical operation with (2)AA alkaline batteries

Digital HT™ Handheld Microphone
– Unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise.
– Sleek rugged housing, battery status LED Power switch and internal antenna for optimum aesthetics.

Frequency Response: 20Hz – 20kHz ± 3dB
Dynamic Range: 120dB (A-weighted)
Total Harmonic Distortion: <0.1%
Latency: 3msec (48kHz Sample Rate)
RF Carrier Frequency Range: Selected frequencies between 902 and 951MHz
Frequency Stability: ± 20PPM, PLL controlled
Modulation: Digital QPSK
Operating Range: Up to 300 ft. typical (depending on site conditions); optimum line-of-sight

Reception: External 7.25” (18.5cm) dual attached antennas
Receiver Sensitivity: -94dBm
Controls: Power ON/OFF, Volume Control
Connectors: 1/4” (6.35 mm) unbalanced phone jack (360 mV/ no load) / Dual XLR balanced outputs (±12 mV/600 load)
LED Indicators: Power ON, RF/AF LEDs
Unwanted Signal Rejection: 60dB image and spurious
Power Requirements: DC 13.5V Regulated @ 400mA
DC input: 2.1mm jack
Weight and Dimensions: 0.8lbs (363g) 8” x 6” x 1.75” (203 x 152 x 44mm)

RF Power Out: +13dBm, (50mW maximum allowed by FCC)
RF Spurious Emissions: <–50 dB
LED Indicator: Unit on (single flash), Low Battery Alert (red)
Battery Type: 2 AA Alkaline
Battery Life: Up to 11 Hours
Audio Input: Integral neodymium dynamic cartridge
Controls: Power switch
Weight and Dimensions: 0.6lbs (272g) / 9.25”(L) x 2”(dia.)

Additional information

Weight 2.5 lbs
Dimensions 14 × 12 × 3 in


[cusrev_all_reviews products ="current"]