Description
The white AcousticCoverage Series QSC AC-S6T is a pair of transformer-equipped 6.5″ surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
Outfitted with a 6.5″ polypropylene woofer and a 1″ aluminum dome tweeter in a UV-treated ABS enclosure with a ported baffle, the AC-S6T offers broad 130° conical coverage while providing a frequency range of 60 Hz to 20 kHz (-10 dB). The speaker is capable of handling 30W RMS and producing a peak maximum SPL of 107 dB.
The AC-S6T utilizes a 4-pole Euroblock connector on the rear panel for easy input and loop-thru wiring. A yoke bracket is included for simplified surface-mount installation.
High-quality transducers provide increased clarity through the critical voice range and improved musicality often not seen in typical BGM-class products
6.5″ polypropylene cone transducer with butyl rubber surround and 1″ aluminum dome tweeter
130° of conical coverage reduces the number of loudspeakers required for even coverage in close proximity
UV-treated, high-impact ABS enclosure and ported baffle assembly
Tuned for added musicality and low-frequency extension down to 60 Hz (-10 dB)
Low-saturation, low-loss 70/100V transformer with 8-ohm bypass and rear-panel tap selector
4-pole Euroblock connector with loop-thru wiring located the rear of the enclosure
Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)
UPC: 684284066831
QSC AC-S6T Specs
Key Specs
Active/Passive
Passive
Number of Included Speakers
2
Speaker Configuration
2-Way
Power Handling
For 2 Hours:
30 W RMS
Constant Voltage / Transformer Taps
70 V:
30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass
100 V:
30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass
Show More
Impedance
8 Ohms (Transformer Bypassed)
HF Driver
1x 1″ / 2.54 cm Aluminum Dome Tweeter
LF Driver
1x 6.5″ / 16.51 cm Polypropylene Woofer
Frequency Range
60 Hz to 20 kHz -10 dB
Color
White
Speaker
Active/Passive
Passive
Number of Included Speakers
2
Speaker Configuration
2-Way
Power Handling
For 2 Hours:
30 W RMS
Recommended Amplifier Power
60 W
Constant Voltage / Transformer Taps
70 V:
30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass
100 V:
30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass
Impedance
8 Ohms (Transformer Bypassed)
Transformer Wattage
30 W
Enclosure Type
Bass-Reflex
Shielded
No
Drivers
HF Driver
1x 1″ / 2.54 cm Aluminum Dome Tweeter
HF Voice Coil
1″ / 2.54 cm
LF Driver
1x 6.5″ / 16.51 cm Polypropylene Woofer
LF Voice Coil
1″ / 2.54 cm
Performance
Frequency Range
60 Hz to 20 kHz -10 dB
Maximum SPL
101 dB (Continuous)
107 dB (Peak)
Sensitivity
86 dB SPL
Coverage Angle
130° (Conical)
Directivity
6 (Directivity/Q Factor)
8 dB (Directivity Index)
Maximum Input Voltage
15.5 V RMS
Connectivity
Inputs/Outputs
1x Block 4-Pole Speaker Input/Thru (Removable)
Maximum Wire Gauge
18 AWG
Environmental
Environmental Protection
Dust/Water-Resistant (IP44)
Operating Temperature
-4 to 122°F / -20 to 50°C
Physical
Color
White
Mounting
1x Bracket Point (Each Side)
Construction Material
ABS, Metal Grille
Dimensions
11.9 x 8.5 x 7.8″ / 30.23 x 21.59 x 19.81 cm
Weight
8.3 lb / 3.8 kg (Each Speaker)
Packaging Info
Package Weight
18.8 lb
Box Dimensions (LxWxH)
15.8 x 11.9 x 9″
