Sennheiser EW 500 G4-MKE2 Wireless Omni Lavalier Microphone System (GW1: 558 to 608 MHz)

Description

Rugged all-in-one wireless system for broadcasters and presenters. Set consists of 1 SK 500 G4 bodypack, 1 MKE 2 Gold Lavalier mic, 1 EM 300-500 rackmount receiver and 1 GA3 rack kit.

The pro‘s choice. Renowned sound engineers rely on ew 500 G4‘s flexibility, especially when handling multi channel settings on the world‘s music stages. Up to 88 MHz bandwidth, up to 32 channels. Ethernet connection for Wireless Systems Manager (WSM) control software included for advanced frequency coordination in multi channel setups.
The pro‘s choice for impressive presentations. The professional MKE 2 Gold omni-directional condenser microphone resists the test of time on any big live stage and ensures a high speech intelligibility on any stage, indoors and outdoors.

True diversity half-rack receiver in a full-metal housing with intuitive OLED display for full control

Easy and flexible wireless synchronization between transmitter and receiver via infrared

Up to 32 compatible channels

Up to 88 MHz bandwidth with 3520 selectable frequencies, fully tunable in a stable UHF range

Ethernet connection for Wireless Systems Manager (WSM) control software for advanced frequency coordination in multi-channel setups

High RF output power (up to 50 mW, adjustable in three steps 10/30/50) depending on country regulations

EM 300-500 G4

Frequency range
Gw1: 558 – 608 MHz

Dimensions
Approx. 202 x 212 x 43 mm

Compander
Sennheiser HDX

THD, total harmonic distortion
≤ 0.9 %

Weight
Approx. 980 g

Audio output
6.3 mm jack socket (unbalanced): +12 dBu
XLR socket (balanced): +18 dBu

Signal-to-noise ratio
≥ 115 dBA

Switching bandwidth
up to 88 MHz

Peak deviation
±48 kHz

Nominal deviation
±24 kHz

Modulation
Wideband FM

Power supply
12 V DC

Antenna connector
2 BNC sockets

Current consumption
350 mA

Adjacent channel rejection
Typically ≥ 75 dB

Intermodulation attenuation
Typically ≥ 70 dB

Receiving frequency
Max. 3520 receiving frequencies, adjustable in 25 kHz steps, 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation, 6 frequency banks with up to 32 programmable channels

RF sensitivity
< 2.5 μV for 52 dBA eff S/N Squelch 5 to 25 dBμV in steps of 2 dB Equalizer Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Temperature Range -10 °C to +55 °C Receiver Principle True diversity Blocking ≥ 75 dB SK 500 G4 Dimensions Approx. 82 x 64 x 24 mm Compander Sennheiser HDX THD, total harmonic distortion ≤ 0.9 % Weight (incl. batteries) approx. 160 g Signal-to-noise ratio ≥ 115 dBA RF output power switchable: Low: typ. 10 mW, Standard: typ. 30 mW, High: typ. 50 mW Switching bandwidth up to 88 MHz Peak deviation ±48 kHz Nominal deviation ±24 kHz Operating time Typically 8 h Modulation Wideband FM Power supply 2 AA batteries, 1.5 V or BA 2015 accupack Current consumption at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 µA Input impedance 40 kΩ, unbalanced / 1 MΩ Max. Input voltage 3 Veff Powering 3 V battery / 2.4 V rechargeable battery Transmission frequency Max. 3520 frequencies, adjustable in 25 kHz steps, 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation, 6 frequency banks with up to 32 programmable channels AF frequency response Mic: 80 – 18,000 Hz, Line: 25 – 18,000 Hz Temperature Range -10 °C to +55 °C Frequency stability ≤ ±15 ppm MKE 2 Connector 3.5 mm jack Frequency response 20 to 20.000 Hz ± 3 dB Max. sound pressure level 142 dB Cable length approx. 1.60 m Transducer principle pre-polarized condensor microphone Pick-up pattern omni-directional Sensitivity in free field, no load (1kHz) 5 mV/Pa, ± 3 dB Equivalent noise level 26 dB Equivalent noise level weighted as per CCIR 39 dB What's in the Box EM 300-500 G4 true diversity receiver SK 500 G4 bodypack transmitter MKE 2 clip-on microphone GA 3 rackmount set 2 AA batteries 2 rod antennas power supply quick guide safety guide manufacturer declaration sheet