Description
The Sennheiser MKE1 Miniature Lavalier Microphone is their smallest, professional lavalier microphone to date. Measuring just 3.3mm (0.12″) in diameter, the MKE1 is well suited for placement in hair, the body, clothing, accessories, props, etc.
Audio signal is reproduced transparently, while maximum intelligibility of speech and vocals is achieved with its omnidirectional polar pattern and wide frequency response.
The Kevlar reinforced cable is rugged and minimizes surface noise. The MKE1’s moisture resistant enclosure protects against damage caused by moisture, making it well suited for actors, performers and broadcast applications.
3-pin Lemo Connector
Great strengths – small microphone
Very small dimensions (3.3mm capsule diameter)
High maximum sound pressure level (142dB)
Very high speech intelligibility; clear, pleasant treble
Full, natural sound with low ambient noise
Thin (1 mm diameter) and robust cable; flexible with minimum handling noise
Very sweat-resistant due to protective membrane
Flexible tubes for attaching the microphone with clips or adhesive tape
Transducer
Condenser
Polar Pattern
Omnidirectional
Frequency Response
20Hz to 20kHz +/- 2.5dB
Dynamic Range (Typical)
Not Specified By Manufacturer
Signal-to-Noise Ratio
Equivalent noise level 27dB
Equivalent noise level 39dB
Maximum Input Sound Level
142dB
Power Requirements
4.5 – 15V
Output Impedance
1k Ohm (Nominal)
4.7k Ohm (Min. Terminating)
Output Connectors
3-pin Lemo
Pad
No
Low Frequency Roll-Off
No
Dimensions
Capsule: 0.12″ (3.3mm) Diameter
Cable Length: 5.24′ (1.6m)
Cable Diameter: 0.03″ (1.0mm)
Weight
0.004 oz (0.1g)
Packaging Info
Package Weight
0.15 lb
Box Dimensions (LxWxH)
6 x 3.3 x 0.6″
