The OneLINK Digital Camera Extension System from Vaddio is a digital camera extension system for Polycom EagleEye IV cameras extending HDMI video, power, and control over a single Cat5e cable over distances up to 328′. The OneLINK system sends and regulates power to the camera, provides bidirectional control channels for RS-232, and transmits/receives uncompressed HDMI video at resolutions up to 1080p60 and 2160p30.

The system consists of a OneLINK EZIM camera interface at the camera location, and a OneLINK HDMI interface at the codec end. The system comes complete with a camera mount that also provides a convenient and unobtrusive mounting location for the EZIM and interface cables at the camera location. The EZIM provides the required camera connectivity and is mounted on the back wall of a heavy-duty gusseted wall bracket with mounting accommodation for the EagleEye IV camera. The gusseted wall bracket can be mounted directly to a two-gang sized electrical box, allowing for a professional and safe installation in a conduit system.

Compatibility Polycom EagleEye IV cameras
Polycom Group series codecs
Resolution HDMI up to 1080p60, 2160p30
Control Support RS-232 and IR
Transmission Range 328′ / 100 m over Cat5e
Connectors OneLINK Interface:
1 x RJ45 shielded, interconnection
1 x HDMI, video output
1 x RJ45 shielded, Ethernet
1 x RJ45 shielded, RS-232
1 x 5.5 mm DC barrel, power input
1 x 3-pin Phoenix, IR forward

1 x OneLINK EZIM:
1 x RJ45 shielded, interconnection
1 x HDMI, video input
1 x RJ45 shielded, Ethernet
1 x RJ45 shielded, RS-232
1 x EIAJ-04, power output
Operating Temperature 32 to 104°F / 0 to 40°C
Operating Humidity (Relative) 20 to 80%
Camera Power 12 VDC, 3 A from EZIM to camera
Power Supply 48 VDC, 1.37 A
Dimensions OneLINK HDMI Interface:
1.7 x 8.4 x 6.0″ / 4.3 x 21.3 x 15.2 cm

OneLINK EZIM
3.9 x 4.3 x 1.2″ / 9.8 x 10.9 x 3.2 cm
Weight OneLINK HDMI Interface:
1.6 lb / 703 g

OneLINK EZIM:
0.6 lb / 250 g
Packaging Info
Package Weight 11.15 lb
Box Dimensions (LxWxH) 13.2 x 10.3 x 6.9″