Description
The RoboSHOT 20 UHD OneLINK Bridge System from Vaddio combines a black RoboSHOT 20 UHD PTZ camera and OneLINK Bridge interface. It is suitable for use in distance learning and corporate environments. The system captures 3840 x 2160 video at 30p from a single 1/2.3″-type Exmor sensor and transmits it up to 328′ over CAT5e/6 cable. The combination enables powering the camera, sending control signals, and transmitting video over a single cable.
The PTZ camera features a 20x total zoom range with 74° angle of view at wide, with a 4.8° angle of view at maximum zoom in. The OneLINK features HDMI, HDBaseT, IP, and HD-SDI video outputs, audio inputs and outputs, and accepts HDBaseT input as well as RS-232 and Ethernet.
Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (Black)
This black RoboSHOT 20 UHD Ultra High-Definition PTZ Camera from Vaddio is suitable for use in distance learning, corporate, and house of worship. It captures UHD 4K (3840 x 2160) at 30p from a single 1/2.3″ type Exmor R sensor. Featuring a 12x optical zoom, with a 1.67x digital zoom for a 20x total zoom range, the camera has a 74° angle of view at wide, with a 4.8° angle of view when zoomed in all the way.
The camera simultaneously outputs HDMI, HDBaseT, 3G-SDI, and IP streaming, so there is no concern about selecting an output port. You can control the camera from a networked computer via the Ethernet port, and an included IR remote provides local control. You can tell at a glance the status of the unit thanks to a built-in LED that changes color to indicate the state of the camera.
The camera’s outputs are active at all times, so there is no need to select one output over another. This also allows you to output to more than one display device or recorder at the same time. The built-in IP streaming simplifies streaming your video over a network.
HDBaseT provides power over an Ethernet cable, so you are not limited where you can mount the camera by needing an AC outlet. You can mount this camera wherever you can run an Ethernet cable. Please note that you will need a network that supports HDBaseT to take advantage of this feature.
You can control the camera via the included IR remote commander, the RS-232 port, or the HDBaseT port.
The camera features built-in web based interface for control via your browser.
Status Indicator LED
Purple: boot-up and Standby modes
Blue: normal operation and is a power on, ready condition
Blinking blue: the camera has received IR from the remote or other IR source
Red: tally function shows that the camera is on-air
Blinking red: fault condition
Yellow: firmware update is in progress
UPC: 840077507770
Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America)
The OneLINK Bridge A/V Interface Receiver from Vaddio connects a non-USB camera and audio source, and bridges to a USB stream for easy connection to USB-based conferencing applications such as Skype for Business, Google Hangouts, and Zoom. This OneLINK Bridge simplifies installation by extending power, video, and control to your Vaddio HDBaseT camera over a single Cat5e cable up to 328′.
Converts any conference room to a BYOD environment, delivering a USB stream for soft conferencing clients
Connects professional A/V equipment to PC applications via USB 3.0 media stream
Simultaneous uncompressed USB 3.0, HDMI 1.4b, and 3 Gb/s HD-SDI
Two balanced audio inputs and two balanced audio outputs
Control via web interface or Telnet
Status lights
UPC: 840077502287
Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (Black) Specs
Key Specs
Image Sensor
2/3″-Type 3-Chip CMOS
Sensor Resolution
Actual: 9.03 Megapixel
Effective: 8.93 Megapixel
Optical Zoom Ratio
12x
Max Digital Zoom
1.7x
External Recording Modes
SDI/BNC / HDMI
3840 x 2160 up to 29.97 fps
Broadcast Output
NTSC
Supported Control Protocols
IP
RS-232
Imaging
Image Sensor
2/3″-Type 3-Chip CMOS
Sensor Resolution
Actual: 9.03 Megapixel
Effective: 8.93 Megapixel
Built-In ND Filter
No
Focus Control
Autofocus
Manual Focus
Exposure Control
Minimum Illumination
3 Lux
Flip / Mirror Support
Mirror (Vertical)
Lens
Focal Length
10 to 120mm
Optical Zoom Ratio
12x
Max Digital Zoom
1.7x
Field of View
Horizontal: 74 to 4.8°
Video Capture
External Recording Modes
SDI/BNC / HDMI
3840 x 2160 up to 29.97 fps
Broadcast Output
NTSC
Control
Presets
16
Move Speed
Pan: 0.35 to 120°/sec
Tilt: 0.35 to 120°/sec
Movement Range
Pan: 320° (-160 to 160°)
Tilt: 120° (-30 to 90°)
Supported Control Protocols
IP
RS-232
Interface
Video I/O
1x BNC (3G-SDI) Output
1x HDMI Output
Other I/O
1x RJ45 (RS-232)
1x RJ45 (LAN)
Power
Power Consumption
Power Supply: 12 VDC at 3 A
General
Certifications
CE, FCC, TAA, UL
Dimensions (W x H x D)
8 x 7.9 x 7.7″ / 20.3 x 20.1 x 19.6 cm
Weight
6 lb / 2.7 kg
Vaddio OneLINK Bridge A/V Interface Receiver For HDBaseT Cameras (North America) Specs
General
Compatibility
Vaddio RoboSHOT 12E / RoboSHOT 30E HDBT / RoboSHOT 20 UHD / RoboSHOT 40 UHD / RoboSHOT IW / DocCAM 20 HDBT
Video Format
Up to 1080p60
Inputs / Outputs
USB I/O
1 x USB-B 3.0 / 3.1/3.2 Gen 1 Female Output
Video I/O
1x HDMI Output
1x BNC (3G-SDI) Output
Audio I/O
2x Block 3-Pin Line/Mic Input
2x Block 3-Pin Line/Speaker Output
Other I/O
1 x RJ45 Ethernet
1 x RJ45 RS-232 Serial
1 x RJ45 OneLINK Digital Camera Interface
Cable Distance Supported
Maximum 328′ / 100 m
Power Input
DC Barrel
Power
Power Source
AC Input
DC Input Power
48 VDC at 1.36 A
Certifications
CE, FCC, TAA, UL
Operating Temperature
32 to 72°F / 0 to 40°C
Operating Humidity
15 to 80% ()
Storage Temperature
-4 to 140°F / -20 to 60°C
Storage Humidity
15 to 80% (Non-Condensing)
Physical
Dimensions
8.4 x 6 x 1.7″ / 21.3 x 15.2 x 4.4 cm
Weight
3.3 lb / 1.5 kg
Packaging Info
Package Weight
3.43 lb
Box Dimensions (LxWxH)
12.3 x 9.3 x 3.2″
