1-888-525-6696

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms

The Yamaha PX3 Stereo Power Amplifier delivers 300W at 8 Ohms in a lightweight chassis and is suitable for a wide variety of sound-reinforcement applications. Part of the company’s PX Series of power amplifiers, it features a Class-D engine with a single custom LSI chip, and uses PLL technology for higher efficiency and lower noise. The Power-Boost mode combines the power output from two channels into one, achieving significantly higher single-channel power levels (the number of channels available is then halved).

$659.99

GTIN: 086792999951 SKU PX3 Categories ,

Description

The Yamaha PX3 Stereo Power Amplifier delivers 300W at 8 Ohms in a lightweight chassis and is suitable for a wide variety of sound-reinforcement applications. Part of the company’s PX Series of power amplifiers, it features a Class-D engine with a single custom LSI chip, and uses PLL technology for higher efficiency and lower noise. The Power-Boost mode combines the power output from two channels into one, achieving significantly higher single-channel power levels (the number of channels available is then halved).

The on-board DSP functions include a PEQ, a delay, a crossover, and a limiter. They also allow for detailed configuration of parameters such as input & output routing, input sensitivity, amp gain, and speaker impedance. The D-Control multi-band dynamic processor delivers a clear and consistent sound at any output level by shaping the frequency response of each speaker for either front-of-house or monitor configurations.

The Configuration Wizard helps save time during setup by assigning optimized speaker settings that match your system configuration. It can be used in basic mode for quick setup or advanced mode for more precise control over DSP parameters. You can store up to eight presets, which can be saved to a USB drive for use with other amplifiers and setups.

For secure operation, the panel-locking function ensures that your settings remain safe. With its sturdy frame and carrying handle, the PX3 is built to withstand extended road use.

Class-D amplifier engine with single custom LSI chip and PLL technology
Power Boost Mode combines the power output from two channels into one
Configuration Wizard allows for configuration of the system by assigning optimized speaker settings which can be saved as presets
Digital routing of inputs & output (dual, parallel, single & SUM)
DSP functions include PEQ, crossover, filters, delay & limiter, accessed via an LCD display
D-Contour multi-band dynamic processing shapes the frequency response of speakers for specific applications
Basic mode for quick setup and Advanced mode for more precise control
Flexible connectivity with XLR & 1/4″ TRS inputs and binding post, SpeakON & 1/4″ TS outputs
Presets can be saved to USB drive for use with other amplifiers and setups
Panel-locking function to keep settings safe
Two 16-step variable-speed fans
Lightweight chassis

Yamaha PX3 Specs

Power Amplifier
Number of Channels 2
Power Rating
8 Ohms:
300 W per Channel
600 W Bridged
4 Ohms:
500 W per Channel
1000 W Bridged
2 Ohms:
300 W per Channel
Amplifier Class Class-D

Performance
Frequency Response 20 Hz to 20 kHz ±1 dB (at 1 W, 8 Ohms)
Input Impedance
10 Kilohms (Unbalanced)
20 Kilohms (Balanced)
Max Gain 35.1 dB (at 8 Ohms)
Max Input Level +24 dBu
SNR 100 dB
THD+N
0.1% (1 kHz, at 10 W)
0.3% (1 kHz, at 1/2 Power)
Crosstalk

Signal Processing
Sample Rate 48 kHz
AD/DA Conversion
A/D: 24-Bit, 128 x Over-Sampling
D/A: 24-Bit, 128 x Over-Sampling
Latency 1.5 ms
Audio Delay Adjustable Up to 74 ms
EQ 6-Band Parametric EQ
Filters
High-Pass:
20 Hz to 20 kHz
Low-Pass:
20 Hz to 20 kHz
Limiting Yes

Connectivity
I/O
2 x XLR 3-Pin Input
2 x 1/4″ TRS Input
2 x speakON NL4 Output
2 x Binding Post Pair Output
2 x 1/4″ TS Output
USB 1 x USB Type-A (USB 2.0)

Power
AC Input Power 120 VAC, 60 Hz
Power Consumption
4 Ohms:
160 W (1/8 Power)
55 W (Idle)

Physical
Cooling 2 x Fan (Variable Speed)
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / 0 to 40°C
Dimensions 18.9 x 3.5 x 15.2″ / 480.0 x 88.0 x 387.4 mm
Weight 15.2 lb / 6.9 kg

Packaging Info
Package Weight 19.5 lb
Box Dimensions (LxWxH) 21.75 x 21.75 x 7.5″

Powerful, Efficient Design

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

PX series models are driven by a newly developed Class-D amplifier engine that concentrates all the necessary functions into a single custom LSI chip, and uses PLL technology to control transfer characteristics in real time, achieving impressive sound quality and power. This new single-chip architecture offers higher output and improved performance in a more lightweight, yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make PX Series amplifiers supremely efficient amplifiers with low noise, reliable protection features, and above all, outstanding sound quality.

DSP for audio processing – Input Routing & Output Routing

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

Amp Mode allows the user to configure the system without difficulty by selecting the input routing and output routing. A total of 15 types of patterns can be selected.

Input routing (Dual/Parallel/Single/SUM)

Speaker System Structure

– FULL+FULL

– SUB+SUB

– FULL+SUB

– Bi-Amp

– Boost Full

– Boost Sub

Versatile Lineup

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

With a lineup comprising four new models – 1,200 W x2 PX10, 1050 W x2 PX8, 800 W x2 PX5, and 500 W x2 PX3* – the PX series offers a versatile range of different power output capabilities suitable for a wide variety of sound reinforcement applications. The PX3 and PX5 also come equipped with a Power Boost Mode that combines the power output from two channels into one, achieving significantly higher single-channel power levels to drive high power handling speakers when needed (note that the number of channels available is halved in this case). *Power output figures rated at 4 Ω

Sophisticated Signal Processing

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

PX series models come with flexible onboard crossover, filters, delay, limiter and PEQ (fixed preset) functions as standard, allowing quick and easy system setup via the LCD display, without the need for any additional outboard gear. All models also feature Yamaha’s intelligent D-CONTOUR multi-band dynamic processing, allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.

Easy, Intuitive Setup

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

To accommodate users with varying levels of sound reinforcement experience, the PX series offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs, while Advanced mode offers experienced users more precise control over every aspect of their sound. All models feature eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers.

Smart Configuration Wizard

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

The Config Wizard allows users to save even more time during system setup by assigning optimized speaker settings that match your system configuration– simply select the appropriate filter and crossover for each speaker, and Config Wizard will do the rest. Config Wizard also features presets* specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including the popular CBR, Club, Installation, and VXS/VXC series, and an advanced mode that allows more detailed configuration of parameters such as input routing, input sensitivity, amp gain, and speaker impedance. *Presets may be added and updated in the future.

Flexible Connectivity, Durable Construction

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

Equipped with both XLR and TRS inputs, and binding post, SpeakON and phone outputs, PX Series amplifiers offer the flexibility needed for a variety of setups and environments, and the durability to stand up to extended road-use thanks to the sturdy chassis and carrying handle design.

Utilities for Safe and Secure Operation

Yamaha PX3 Power Amp 500 Watts X 2 @ 4 Ohms - Yamaha Commercial Audio Systems, Inc.

PX Series amplifiers make it fast and easy to configure panel settings, monitor amplifier status, and transfer data via USB, and also feature a panel locking function to keep your settings safe. Users can even export information such as internal device and log data to USB for rapid troubleshooting should difficulties arise.

Additional information

Weight 19.60 lbs
Dimensions 21.75 × 21.75 × 7.5 in