1-888-525-6696
Search
Search

KanexPro 4K/30 HDMI Extender over HDBaseT (131′)

KanexPro HDMI Extender over HDBaseTT 70M

$262.45

GTIN: 813982021624 SKU EXT-HDBT70C Categories ,

Description

Supporting 4K HDMI signals over category cable, the KanexPro 4K/30 HDMI Extender over HDBaseT enables extending transmission of 4K signals up to 131′ and HD signals to up to 230′. It is well suited for use in residential applications, digital signage applications, as well as for sending HDMI signals in healthcare AV facilities, control rooms, educational facilities, and airports. This unit consists of both the transmitter and receiver. Following the HDBaseT protocol, the transmitter and receiver support PoH (Power over HDBaseT), which allows you to power both transmitter and receiver using only the one included power supply.

The EXT-HDBT70C transmitter/receiver pair supports HDCP 2.2 and is EDID compliant enabling it to support HDMI content. 10.2 GB/s of bandwidth allows it to easily support signals up to 4K2K @ 30 Hz, at distances up to 131′. The pair supports bidirectional RS-232 and IR control, Dolby TrueHD & DTS Master Audio, as well as uncompressed LPCM audio. An IR Emitter Cable, IR receiver cable, and a power supply are included.

Used to extend transmission distances for 4K2K signals up to 131′ over a single Cat 5e/6 low-impedance STP (shielded-twisted pair) cable
It supports control over RS-232 and IR
The pair includes both an IR emitter and receiver cables. This allows you to control a device at the receiver end of the cable run from the transmitter
Receiver can be powered directly by a power supply, or by Power over HDBaseT from the transmitter
HDCP 2.2 and EDID compliant
Supports CEC/IR/RS-232 pass-thru
IR input/output – embedded over CATx extension
Dolby TrueHD & DTS Master Audio ready
Supports uncompressed audio – LPCM

KanexPro EXT-HDBT70 Specs
Chassis Metal enclosure
Interface Transmitter Input
HDMI: 1 x type A
Transmitter Output
HDBaseT: 1 x RJ45
Transmitter Control Ports
RS-232: 3-pin captive screw connector
IR: 3.5 mm stereo jack

Receiver Input
HDBaseT: 1 x RJ45
Receiver Output
HDMI: 1 x type A
Receiver Control Ports
RS-232: 3-pin captive screw connector
IR: 3.5 mm stereo jack
Video Signal Input
HDMI 1.4

Output
Digital audio transmitted through HDMI audio
Resolutions 640×480 @ 60 Hz to 4K2K @ 30 Hz
Transmission Mode HDBaseT
Transmission Distance 4K2K: 131.23′ / 40 m
1080p60: 229.66′ / 70 m
Bandwidth 10.2 GB/s
HDMI Standards HDMI 1.4
HDCP 2.2
Impedance 75 Ohms
Power Consumption 14 W max
Power Supply Input: 100 to 240 VAC, 50/60 Hz
Output: 24 VDC, 1.25 A
Environmental Temperature: 32 to 122°F / 0 to 50°C
Relative Humidity: 10 to 90% (non condensing)
Dimensions 4.17 x 0.60 x 3.30″ / 10.59 x 1.52 x 8.38 cm (each)
Weight 0.55 lb / 0.25 kg
Packaging Info
Package Weight 1.35 lb
Box Dimensions (LxWxH) 8.8 x 5.9 x 3.65″

Additional information

Weight1.35 lbs
Dimensions8.8 × 5.9 × 3.65 in
See any errors on this page? Let us know