The ZP-001T from TOA Electronics is a telephone zone paging module for use with 9000 series amplifiers. It allows telephone access paging to up to eight different zones in one operation and uses DTMF dialing to access amplifier and/or line outputs. It is analog extension or page port compatible; page port operation requires contact closure activation. It has an RJ-11 jack and three 4-pin removable terminal blocks for connection.

Note:
Only one ZP-001T module may be installed in an amplifier chassis.

Power Source +24 VDC, +6 VDC
Current Consumption
38 mA @ +24 VDC
18 mA @ +6 VDC
Number of Lines 1
Type of Selectable Signal DTMF Signal
Signaling System Loop-Start or Ground-Start (Selectable)
TEL Line 0dB, 600 ohm, Balanced, RJ-11 Connector/4-Pin Removable Terminal Block
Control Input
1 Channel, No-Voltage Make Contact, Open Voltage: 5 VDC,
Short-Circuit Current: 0.5 mA, 4-Pin Removable Terminal Block
Control Output
4 Channels, Open-Collector Output (Isolated), Withstand Voltage: 35 VDC,
Control Current: 50 mA Max, 4-Pin Removable Terminal Block
Operating Temperature -10 Degrees C to +40 Degrees C
Dimensions 1.4 x 3.1 x 3.6″ (35 x 78 x 92 mm)
Weight 5.4 oz (153 g)

Packaging Info
Package Weight 0.42 lb
Box Dimensions (LxWxH) 4.17 x 3.23 x 1.65″