Description
The Ashly NX3.02 Programmable Output Power Amplifier features lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The NX3.02 amplifier is designed to meet the needs of demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
The NX3.02 is a base level amplifier, available in either 2 or 4-channel models. Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2Ω) operation. When in Sleep Mode, the NX3.02 amplifier draws less than 1W.
Ashly NX3.02 Specs
Output Power Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1%THD, Low Z Output, All Channels Driven
2 Ω: 3,000 W
4 Ω: 2,000 W
8 Ω: 1,250 W
Low Z output, Bridge Mode, 20 Hz to 20 kHz, 1%THD, All Channels Driven
4 Ω: 6,000 W
70 V, 100 V Output, All Channels Driven
70 V (per channel): 2,450 W
100 V (per channel): 1,250 W
Power Draw Sleep Mode: < 1 W
Standby Mode: 40 W
Idle (no signal): 55 W
Current Draw 120 VAC Mains (Divide by 2 for 240 V)
Sleep Mode: 0.1 A
Standby Mode: 0.70 A
Idle (no signal): 1.00 A
All Channels Driven (Divide by 2 for 240 VAC)
Typical: 14.7 A
Dissipation Thermal (All Channels Driven)
Sleep Mode: 3.4 BTU/hr
Standby Mode: 136 BTU/hr
Idle (no signal): 187 BTU/hr
Typical (1/8 maximum power): 1360 BTU/hr
Voltage Gain Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
Damping Factor >250 (8 Ω load <1 kHz)
High-Pass Filter Input: 80 Hz 2nd order
Distortion SMPTE (typical): <0.5%
THD-N (typical): <0.5% (8 Ω, 10 dB below rated power,20 Hz to 20 kHz)
Channel Separation -75 dB (dB from full output, 1 kHz)
Signal to Noise Ratio 20 Hz to 20 kHz (unweighted): >114 dB
Frequency Response 20 Hz to 20 kHz, +/-0.05 dB
Input Connector Balanced: Euroblock 3.5 mm, 1/4″ TRS and XLR Combo jack
Input Impedance 10 kΩ
Maximum Input Level +21 dBu
Output Connector Speaker: Neutrik speakON
Connection Data: Euroblock 3.5 mm – Gnd, 18 V, In, Out
Level Control Remote DC: Euroblock 3.5 mm – Gnd, CV, V+ per input
Attenuation Per Channel: Front panel, software, offset link group, and remote. Fully off = Mute
Protection Amplifier: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Cooling Continuously variable temperature controlled axial fan(s)
Environmental 32 to 113˚F (0 to 45˚C) non condensing
Dimensions 19.0 x 3.5 x 16.8″ (482.6 x 88.9 x 426.7 mm)
Weight < 28.0 lb (12.7 kg)
Packaging Info
Package Weight 30 lb
Box Dimensions (LxWxH) 19 x 16 x 4"