KanexPro 4 x 2 HDMI 4K/60 Matrix Switcher with HDR10 & EDID Management

Description

The KanexPro 4 x 2 HDMI 4K/60 Matrix Switcher with HDR10 & EDID Management is a four input x two output matrix switcher that supports HDMI 2.0. This switcher allows you to feed any input to any output. It is well-suited to classrooms, corporate video, retail stores, and even home theaters that have two 4K displays that are fed from multiple 4K sources. The matrix switcher supports video from DCI 4K at 60 fps, which has a resolution of 4096 x 2160, to 480i at 60fps, which is the digital equivalent of SD video. It can also support computer resolutions from WUXGA down to VGA.

Supporting HDMI 2.0, HDCP 1.4 and 2.2, and being DVI 1.0 compliant allows this matrix switcher to support a wide range of formats, frame rates, and color depth to provide you video distribution with virtually no visual or audio compromises. Video with 4:4:4 color sampling and data rates up to 18 Gb/s are supported, as is HDR video, and the switcher will pass LPCM 7.1 audio. Control over the switcher is available through front-panel buttons, RS-232, Telnet, WebGUI (via Ethernet), and IR is used for control of attached devices. EDID management enables the switcher to communicate with HDCP enabled devices allowing it to accept the video signal.

Switch 4 HDMI devices to 2 displays
Supports 4K/60, HDR, and 4:4:4
Matrix routing of four 18 Gb/s HDMI inputs to two 18 Gb/s HDMI outputs
Supports resolutions up to 4096 × 2160 @ 60 Hz (4:4:4, 8-bit)
HDMI 2.0 and DVI 1.0 compliant
HDCP 1.4 and 2.2 compliant
Maximum data rate up to 18 Gb/s with Deep Color support up to 16-bit at 1080p
Supports pass-through of LPCM 7.1, bitstream, and HD bitstream audio formats
Supports EDID management via five pre-defined internal EDIDs and two external EDID options
Multiple control interfaces including RS-232, Telnet, WebGUI, and IR remote

KanexPro HDMMX42 Specs
Resolutions Supported 480i @ 60 – 4K @ 60 Hz (4:4:4, 8-bit) VGA @ 60 Hz – WUXGA @ 60 Hz (RB)
Video Bandwidth 600 MHz / 18 Gb/s
Connections Input
HDMI: 4 x Type A

Output
HDMI: 2 x Type A

Interface
IR: 1 x 3.5 mm
RS-232: 1 x 9-Pin D-Sub
IP Control: 1 x RJ45
IR Frequency Range 30 to 50 kHz
30 to 60 kHz (Under Ideal Conditions)
Baud Rate 115200 bps
ESD Protection Human Body Model: ±12 kV (Air Discharge), ±8 kV (Contact Discharge)
Power Supply Output Voltage: 5 VDC, 2.6 A
Certifications: CE/FCC/UL
Power Consumption 7.1 W
Environmental Operating Temperature: 32 to 104°F / 0 to 40°C
Storage Temperature: -4 to 140°F / -20 to 60°C
Humidity: 20 to 90% RH (Non-Condensing)
Dimensions Case Only: 9.45 x 1.69 x 4.09″ / 24 x 4.3 x 10.4 cm
All Inclusive: 9.45 x 1.89 x 4.42″ / 24 x 4.8 x 11.22 cm
Weight 28.1 oz / 796 g
Packaging Info
Package Weight 2.87 lb
Box Dimensions (LxWxH) 11.2 x 7.2 x 2.9″