Sennheiser MEG 14-40-L-II Gooseneck Microphone & MAT 153-S Table Stand Kit

Description

Set the scene for clearly structured meetings and discussions with the MEG 14-40-L-II Gooseneck Microphone & MAT 153-S Table Stand Kit from Sennheiser. With a clearly visible green LED ring on the gooseneck and a prominent mic button on the stand, this kit is intuitive and easy to operate. The mic uses a KE10 capsule to maximize speech intelligibility.

Powered by a single 3-pin XLR cable (available separately), this kit integrates into your setup in a snap. A TTL logic output on the bottom of the table stand can be used to activate a camera or media control system.

Sennheiser MAT 153-S Table Stand with LED Light Ring Button for 5-Pin XLR Gooseneck Microphone
The black MAT 153-S Table Stand from Sennheiser is a sturdy, wired table stand that provides a stable base for 5-pin XLR gooseneck microphones. It has a user-friendly microphone button with a two-color status display that provides quick visual feedback on whether the microphone is active or muted. The TTL logic output on the underside can be used to activate a camera or media control system. The table stand is powered via a separately available 3-pin XLR cable.

UPC: 615104230668
Sennheiser MEG 14-40-L-II Gooseneck Microphone (XLR 5-Pin, Green Light Ring)
The Sennheiser MEG 14-40-L-II is a 15.7” gooseneck microphone designed to provide intelligible speech reproduction for lectures, conferences, meetings, and houses of worship. It features an XLR 5-pin connector, which carries power for its green light ring and audio signal to a preamp. The green light ring indicates when the speaker can take the floor.

Its KE 10 capsule features a directional cardioid polar pattern and yields a frequency response of 50 Hz to 20 kHz. RF shielding protects against interference from wireless devices, giving you a cleaner signal. The flexible 15.7” gooseneck allows precise placement in front of the spokesperson. No batteries are needed to power the MEG 14-40-L-II, it operates on 12 to 48V phantom power.

15.7″ gooseneck mic with integrated Sennheiser KE 10 cardioid capsule
RF shielding against intermodulation from wireless equipment
Streamlined design for seamless integration
XLR 5-pin male connector
Made in Germany

Connectors
Mic In: 5-Pin XLR Female
Mic Out: 3-Pin XLR Male
Logic: Clip Contact for Logic In (External LED Control), Ground, and Logic Out (Switch Signal)
Current Consumption
3.7 mA
Input/Output Voltage
Logic Out: High-Level Output Voltage >2.4 V, Low-Level Output Voltage <0.4 V
Logic In: High-Level Input Voltage >2.0 V, Low-Level Input Voltage <0.8 V
LED Status Indicator
Light Ring: Red/Green
Dimensions
Not Specified by Manufacturer
Weight
Not Specified by Manufacturer
Packaging Info
Package Weight
3.505 lb
Box Dimensions (LxWxH)
9.8 x 9.2 x 3.8″
Sennheiser MEG 14-40-L-II Gooseneck Microphone (XLR 5-Pin, Green Light Ring) Specs
Key Specs
Form Factor
Desktop
Capsule
1 x Electret Condenser
Polar Pattern
Cardioid
Frequency Range
50 Hz to 20 kHz
Maximum SPL
130 dB SPL
Output Connector
1 x XLR 5-Pin Male
Microphone
Primary Applications
Corporate Presentation
Form Factor
Desktop
Intended Sound Sources
Speech/Voice-Over
Sound Field
Mono
Capsule
1 x Electret Condenser
Polar Pattern
Cardioid
Windscreen
None
Performance
Frequency Range
50 Hz to 20 kHz
Maximum SPL
130 dB SPL
Impedance
100 Ohms
Equivalent Noise Level
26 dB
37 dB CCIR
Connectivity
Output Connector
1 x XLR 5-Pin Male
Power
Operating Voltage
12 to 48 V
Operating Current Consumption
3 mA
Physical
Color
Black
Mounting
Desktop Stand (via Integrated Hardware)
Included Case
None
Included Filters
None
Operating Temperature
32 to 104°F / 0 to 40°C
Dimensions
ø: 0.3 x L: 17.7″ / ø: 8 x L: 450 mm
Weight
5.2 oz / 147 g
Packaging Info
Package Weight
0.55 lb
Box Dimensions (LxWxH)
19.8 x 1.7 x 1.7″