Description
The Ashly MX-206 Stereo Microphone Mixer is a 6-input microphone mixer designed to supplement larger consoles or for use as a stand alone mixer in sound-reinforcement and portable installations. The MX-206 features 6 studio grade, low-noise XLR 3-pin microphone preamps. Each input features a 20dB Pad switch that avoid signal overload due to excessive gain.
All of the MX-206’s microphone preamps are capable of supplying +48V phantom power (globally switched) to condenser microphones. The output section features a balanced XLR mono, and L/R RCA stereo outputs. An Aux stereo input also features unbalanced L/R RCA stereo input connections and can be used to input signal from playback devices or additional mixers. The front panel features Level and Pan control as well as -20, -40 & -60dB gain switches for each input channel. The MX-206’s compact, single-rack-space design allows easy storage and transport for mobile use.
6 Microphone Inputs
Stereo and Mono Output
Stereo AUX Input
Pad Switches
Gain Switches
Pan Control
+48 Volt Phantom Power
Ashly MX206 Specs
Total # Of Inputs 6 – Balanced 3-pin XLR
Mic/Line Inputs 6 – Balanced 3-pin XLR Microphone Inputs
Stereo Line Inputs No
In-Line Inputs/Returns not applicable
AUX Sends No
AUX Returns No
Inserts No
BUS (Group) Outputs Stereo output bus only
2 Trk Master I/O Master Output: L/R Balanced 1/4″ TRS Phone Tape I/O: L/R RCA Phono
ALT I/O Mono Output: Balanced 3-pin XLR
Monitor Outputs Headphone Output: 1/4″ TRS Phone
EQ Section No
Solo/Mute Individual channel Mute switches & Stereo Output Mute switch
Channel Level Control Sealed Rotary Potentiometers (POTS)
Trim/Gain Control same as Channel Level
Phantom Power not applicable
Metering VU Meters: Two 5-segment LED meters. 0 VU = +4dBu
Peak Indicators: Left and right peak clip indicators
Frequency Response +/- 0.2dB 20Hz – 20kHz
Dynamic Range Not Specified by Manufacturer
Signal-to-Noise Ratio (20Hz – 20kHz noise bandwidth):
-100dBu residual output noise, all level at minimum
-87dBu master out, master level and one input level at unity gain
Total Harmonic Distortion (THD) Less than 0.02% THD @ +20dBu, 20Hz – 20kHz
Power Supply 120VAC nominal, 93VAC minimal, 50-60Hz, 12 watts (240VAC available)
Dimensions 19 x 1.75 x 6.6″ (482.60 x 44.45 x 167.64mm) (WxHxD)
Weight 8 lbs (3.63 kg)
Packaging Info
Package Weight 10.255 lb
Box Dimensions (LxWxH) 24 x 15 x 3″