Description
The Ashly ne8250peD is a 250-watt @ 4 Ohm, eight-channel amplifier with DSP and OPDante option cards. Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. Network Enabled (NE) amplifiers offer ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed. Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators.
Features
- Eight Channel AmplifierProtēa DSPDSP Processing on inputs and outputsOPDante Option Card10/100 Ethernet comes standardDC voltage remote gain controlEthernet remote control and monitoringSwitch mode supply, Class-D outputStepped, calibrated input attenuatorsRemote turn on/offDisable all front panel controls via softwareTemperature-sensitive variable speed fan with side-to-front airflowSelectable HPF frequenciesLow Impedance4-stage level metersOutput current and temp indicatorsSafety/Compliance: TUV, CE, FCC,RoHS
- Eight Channel Amplifier
- Protēa DSP
- DSP Processing on inputs and outputs
- OPDante Option Card
- 10/100 Ethernet comes standard
- DC voltage remote gain control
- Ethernet remote control and monitoring
- Switch mode supply, Class-D output
- Stepped, calibrated input attenuators
- Remote turn on/off
- Disable all front panel controls via software
- Temperature-sensitive variable speed fan with side-to-front airflow
- Selectable HPF frequencies
- Low Impedance
- 4-stage level meters
- Output current and temp indicators
- Safety/Compliance: TUV, CE, FCC,RoHS
-
- Eight Channel Amplifier
- Protēa DSP
- DSP Processing on inputs and outputs
- OPDante Option Card
- 10/100 Ethernet comes standard
- DC voltage remote gain control
- Ethernet remote control and monitoring
- Switch mode supply, Class-D output
- Stepped, calibrated input attenuators
- Remote turn on/off
- Disable all front panel controls via software
- Temperature-sensitive variable speed fan with side-to-front airflow
- Selectable HPF frequencies
- Low Impedance
- 4-stage level meters
- Output current and temp indicators
- Safety/Compliance: TUV, CE, FCC,RoHS
Specifications
- Rated Power 8 ohms (per channel) 150W
- Rated Power 4 ohms (per channel) 250W
- Rated Power 8 ohms (Bridged) 500W
- S/N (20 Hz-20 kHz, unweighted) >105dB
- Idle Power 30W
- Idle Current 0.4A
- Frequency Response (8 ohms): 20 Hz – 20kHz, (unweighted) ±1dB
- Input Impedance: 20k ohms, balanced
- Input Sensitivity: 6.2dBu
- Maximum Input Level: +21dBu
- Internal HPF (25V, 70V, 100V models): (controlled by software) 80Hz (12dB/oct), 400Hz (6dB/oct), and OFF
- Damping Factor (8 ohms): > 250
- Cooling Temperature: dependent speed-controlled fan (Front in, Side out)
- Output Circuitry: Class D
- Cordset: 15A Edison 3-Prong IEC
- Weight: 21.0 lbs. (9.53kg)
- Dimensions:
- Height: 3.50″ (88.9 mm) 2RU
- Width: 19″ (483 mm)
- Depth: 15.5″ (394 mm)
