Description
Easy to operate the 2-channel Nady GEQ-215 graphic equalizer was built with input from professionals and working musicians. With 15 adjustable bands of frequency this compact and durable all-steel chassis, that fits in a 19” single rack space, provides control over all live and recording applications.
Nady GEQ-215 Features
Balanced XLR and 1/4″ TRS input/output connectors
Constant-Q bandwidth from each filter with 3% center frequency accuracy
Parallel filter design for minimal phase distortion
Ultra low-noise circuitry
Low-cut filter at 40Hz, 12dB/octave switchable, with status LED
Band range: +/- 12dB gain
Equalizer On/Off bypass switch with status LED
Center detents on faders and variable input level control (+/- 12dB)
Gain status LED bar graph with peak LED
Power switch with integral LED On indicator
Shielded internal power supply with AC input and selectable line voltage (-115V/60Hz or -230V/50Hz)
Compact and durable all-steel chassis design
Nady GEQ-215 Specifications
Equalizer
Control Bands
2x 15, 2/3 Octave ISO Spacing From 25Hz to 16KHz
Filter Type
Constant Q
Slider Travel
20mm (Center Detent)
Level Control Range
+/-12dB
Inputs
Type
Active Balanced
Connectors
3-Pin XLR, 1/4″ TRS
Impedance
40K Ohms
Maximum Level
28dBV
Outputs
Type
Unbalanced
Connectors
3-Pin XLR, 1/4″ TRS
Impedance
Typically < 400 Ohms
Maximum Level
+/-20dBV
Clip LED Threshold
3dB (Below Clipping)
Low Cut Filter
40Hz, 12dB/octave
Frequency Response
20Hz - 20KHz, +/- 1dB
THD + Noise
<0.008% (@ 1KHz, all faders at mid position)
Signal to Noise Ratio
95dB (@ 1KHz)
Channel Separation
60dB (1KHz)
Line Voltage
100-130V AC, 50/60Hz
Power Consumption
Maximum: 15 watts
Physical
Dimensions (W x H x D)
19 x 1.75 x 8.66" (48.2 x 4.4 x 12.7cm)
Weight
4.15 lbs (1.9kg)