1-888-525-6696
Search
Search

Yamaha DZR315 Powered Speaker – 2000W, 3-Way 15″ Lf, 8″ Mf, 2″ Hf Comp Driver

The white Yamaha DZR315 is a 3-way powered loudspeaker designed for main/FOH applications. The 2000W Class-D bi-amp powers the 15″ woofer, 8″ midrange driver, and 2″ compression driver, which combine to provide a frequency range of 31 Hz to 20 kHz (-10 dB) with a maximum SPL of 143 dB.

$1,799.99

GTIN: 889025114790 SKU DZR315 Categories ,

Description

Priced and sold as individual.

The white Yamaha DZR315 is a 3-way powered loudspeaker designed for main/FOH applications. The 2000W Class-D bi-amp powers the 15″ woofer, 8″ midrange driver, and 2″ compression driver, which combine to provide a frequency range of 31 Hz to 20 kHz (-10 dB) with a maximum SPL of 143 dB.

The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR315 is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multiband compressor that ensures the DZR315’s sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers.

The rear panel offers two combo XLR-1/4″ inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The Yamaha DZR315 ships with a standard IEC power cord.

General Features
3-way powered loudspeaker
HF: 2″
MF: 8″
LF: 15″
Ideal for FOH/Main PA
Maximum SPL: 143 dB
Frequency range (-10 dB): 31 Hz to 20 kHz
High-power 2000W Class-D amplifier module
Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
Optional speaker cover available (SPCVR-DZR315)
Advanced FIR-X Tuning
96 kHz DSP processors help focus the power output of the DZR315 into high-resolution sound with super-low latency
Yamaha’s Advanced FIR-X tuning improves significantly on their proprietary FIR-X tuning technology which utilizes linear phase FIR filters for the crossover network and correct EQ
Using FIR filters, Yamaha was able to realize very smooth frequency response for remarkable clarity and sound imaging without phase distortion
Accurate EQ filtering is also provided for pinpoint adjustment to realize ideal clarity and SPL without signal degradation
An onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and make precise adjustments to PEQ, delay, and routing
Store up to 8 user presets to save your own parameter adjustments, or use the optimized dedicated factory presets for using DZR and DXS XLF Series in combination
Users can easily transfer saved settings to a USB flash drive
D-Contour
D-CONTOUR is an intelligent multiband compressor that ensures your DZR’s sound stays consistent and clear no matter how hard you drive them
By constantly monitoring the output of multiple frequency bands and applying the optimum EQ adjustments for each, even the highest output levels maintain outstanding clarity and musicality
D-CONTOUR provides settings for the FOH/Main mode, which boosts the lower frequencies to compensate for low end that is typically missing when speakers are used in suspended applications
Presets were created by performing countless listening tests with skilled sound engineers to ensure consistent sound with low distortion at any output level
DSP Protection
DSP protection functions for maximum output and component longevity
Active loudspeakers ensure the combination of transducers and amplifiers are matched and optimized for the best possible performance
During development, Yamaha measured and tested the durability of each transducer and the overall amplifier output to set optimal limiter points using precise DSP control
Employing many of the same protection functions used in high-end professional power amplifiers, Yamaha’s DSP consistently monitors the status of the power supply, power amplifiers, transducers, and signal levels to protect each component in order to maintain optimum performance while extending component life and usability

Yamaha DZR315 Specs

PA Speaker
Configuration Active 3-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity
2000 W Peak
950 W RMS
Amplifier Power Rating
LF:
1000 W Peak
850 W RMS
HF/MF:
1000 W Peak
100 W RMS
Amplifier Class Class-D

Drivers
HF Driver 1 x Titanium Compression Driver with 1″ / 25.4 mm Throat
HF Voice Coil 2″ / 50.8 mm
MF Driver 1 x 8″ / 203.2 mm Cone
MF Voice Coil 1.5″ / 38.1 mm
LF Driver 1 x 15″ / 381 mm Woofer
LF Voice Coil 3″ / 76.2 mm
Magnet
HF:
Neodymium
MF:
Ferrite
LF:
Neodymium

Performance
Frequency Range 31 Hz to 20 kHz -10 dB
Maximum SPL 143 dB
Coverage Angle 75° H x 50° V
Max Input Level
Line Input:
+24 dBu
I/O Impedance
Input:
20 Kilohms

Connectivity
Audio I/O
2 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Input
2 x XLR 3-Pin Male Balanced Output
USB 1 x USB Type-A (External Memory, Host Connection)

Signal Processing
Crossover
Low-Pass:
700 Hz (Active)
High-Pass:
2.5 kHz (Passive)
Max Sample Rate/Resolution 96 kHz

Power
AC Input Power
Universal:
100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC (Locking)
Power Consumption
45 W (Idle)
150 W (1/8 Power)

Physical
Mounting 16 x M10 Fly Point
Handles 1 x Each Side
Cooling Fan (Variable Speed)
Construction Material Plywood
Dimensions 21.7 x 35.3 x 20.5″ / 550 x 897 x 520 mm
Weight 91.7 lb / 41.6 kg

Additional information

Weight 119.05 lbs
Dimensions 21.7 × 35.3 × 20.5 in
See any errors on this page? Let us know